My year in review; 2025

My year in review; 2025

Belated Happy Solstice, Happy Hanukkah, and Merry Christmas. I hope you are still enjoying the festive season (hopefully with fibre and felt!)

What in the world did I get done this year? This should be interesting, since most of this year was a blur of post-surgery and anaesthetic recovery (including a few very tiny but powerful pain pills – I have no idea what they were, but I vaguely think they may have been green?), I am extremely curious to see if I actually got anything done this year. If you are curious too, let’s take a look!

 

January: I was trying to get organised after getting bad medical test results (I was never good at tests) and found out I was going to have another surgery at the end of the month. Then be out of commission for a lest a couple of months afterwards.  I focused on getting notes ready for the other librarians to take over running the whole Guild library while I was out of commission.  I also taught an inkle weaving workshop and took a workshop on tablet weaving.

A big cheer up was the felt Christmas card from Eleanor. I was not feeling well after diagnostic testing and dreading the impending surgery, so perfect arrival timing!

Felted cristmas card exchange from 2024, a 3-D christmas tree and a raven on a branch in black / white/ grey1.1) Above the card from Eleanor, below was the card I sent to Eleanor

 

February 1st found me getting a drive home from the hospital rather than going to the Spin-in in Chesterville, Ontario. I have photos of the guild’s February meeting, and a few shots from other guild members of some of the things I missed. I know I was doing things, but I don’t remember any of it.

 

March was also a write-off. Anaesthetic and my brain are not friends. Luckily, Ann and Ann were running the library.

 

By April, one of the Librarian Anns had to step away from the library due to illness. I returned to work,  a bit early, Glenn dropping me off and picking me up (driving was not an option yet), it was unfortunately shorter than normal hours. I was not really up to speed; it took all day just to keep the library running. I brought in felting to work on if I got my library work done, but no luck.moose head and moose bag i had been working on at the end of 2024 but was not getting enuff work done to work on them in January2.1) Moose head and moose landscape bag. At this point, it was still probably a good idea not to be doing a lot of stabbing with sharp objects.

April was not all frustrating and forgotten, I also got a surprise to cheer me up! I was watching Marie from Living felt on YouTube and had been commenting on her videos (not that I remembered doing so shortly after each episode), one of which was her store’s Birthday party. My anaesthetic brain at the time did not remember winning anything, so I was so happy and surprised when one of her deluxe wet felting kits arrived! Thanks, Marie, that really cheered me up! (and I got to try it for workshops much later in the year).

Living felt from Texis wet felting tool kit and bag2.2)A surprise from Living Felts on line Birthday party

 

May arrived, but was still mostly lost in the fog. I seem to have worked on the Library report, and I am pretty sure it was Glenn who drove us down to the fibre festival at Spencerville (south of Ottawa). I have vague memories that I was very sore getting there and back, but it was so nice to get out and see friends and look at shopping.

3.1) Spencerville Fiber festival 2 photos of shoppers and booths3.1) Spencerville Fibre Festival

The long weekend in May (Friday to Sunday) was also CanGames and ghelting convention, which I have told you about before. I finally thought it might be safe to try a needle felting project. I may have been a bit premature in trying that. I somehow wound up with 6 fingers on one hand, and my under structure wrapping was not as tight as it should be.

3.2-3.3) Oops still can’t count! hand with 5 fingers and a thumb 3.2-3.3) hand repaired to only have 4 fingers and a thumb3.2-3.3) Oops, still can’t count!

evicting racoon in live trap from the garrage3.4) I somehow forgot we evicted another garage dweller. He was not impressed.

 

By June, I was feeling safer to make expensive decisions, but I limited it to one new camera. The old one was over 13 years old and was needing an upgrade. I still don’t really remember much unless I am looking at the photos from what I was up to. (I am glad I took pictures, or I would not remember doing anything!)

4.1) new Nikon bird watching camera with sneaky powerful zoom feature.4.1) new Nikon bird watching camera with sneaky powerful zoom feature.

4.2) I continued to putter on the Mer-Boyfriend I was creating for the missing Miss Mer 4.2) I continued to putter on the Mer-Boyfriend I was creating for the missing Miss Mer.

June 07, we tried to be in two places at once, the Lamsdown Fibre festival and the Dickonson Day Demo. I was doing shopping and photography, so no felting!

4.3) Demo at Dickonson Day4.3) Demo at Dickonson Day

4.4) one of vendors at Lamsdown 4.4) one of the vendors at Lamsdown

I had been trying to be careful about large perchasess with anesthetic-brain but I had been waiting for a stock tank of about this size to go on sale, so I bought it!

4.5) 75-gallon stock tank, becomes perfect fleece washing station. 4.5) A 75-gallon stock tank becomes a perfect fleece washing station.

With the addition of a fleece washing station in the side yard/Driveway, I got to work washing my way through the fleeces from the last couple of summers I had not felt up to working on.

4.6) Glenn was very helpful working the spin dryer for me. (its an old RV hand washer/spin dryer) 4.6) Glenn was very helpful working the spin dryer for me. (It’s an old RV hand washer/spin dryer)

4.7-4.8)the father’s day weekend brings a blacksmithing workshop to the Glengarry Pioneer Museum in Dunvegan Onrario (East of Ottawa) - black smith made sisors on display on a folding wood table 4.7-4.8)the father’s day weekend brings a blacksmithing workshop to the Glengarry Pioneer Museum in Dunvegan Onrario (East of Ottawa) - needle felting mer-person4.7-4.8)the Father’s Day weekend brings a blacksmithing workshop to the Glengarry Pioneer Museum in Dunvegan Onrario (East of Ottawa).

This was a great chance to do some photography of blacksmithing, and do a bit more felting, on the young mer I had started last month.

4.9)There was also a demonstration of finishing a blanket by walking it. (walking is likely spelt differently when applied to a wet blanket thumped repeatedly on a table.) 4.9)There was also a demonstration of finishing a blanket by walking it. (walking is likely spelt differently when applied to a wet blanket thumped repeatedly on a table.)

 

July continued fleece washing, a bit at a time. I still seem to keep over-exerting myself, but I was feeling so far behind.

5.1) 3 more bins to sort and wash. 5.1) 3 more bins to sort and wash.

5.2) Trying to sort without a skirting table 5.2) Trying to sort without a skirting table.

This month, I was back to the Glengarry Pioneer Museum to demo felting for them at their Fibre/Textile day.

5.3) 3 of the Mer Family and their pets get out to a demo. It was an extremely hot day and they seemed happy to be in the shade of the porch.5.3) 3 of the Mer Family and their pets get out to a demo. It was an extremely hot day, and they seemed happy to be in the shade of the porch.

 

In August, the guild had a workshop on Cyanotype printing with felt. It was a half-day workshop and ran twice. I took lots of photos, which reminded me of playing with the enlarger in the dark room.

6.1)Cyanoprinting with felt6.1)Cyanoprinting with felt

August is also the time of the very large fibre festival Twist, about an hour away in Quebec. Glenn came with me as my attendant, and I filled in at the guild demo table with the Mer boyfriend I was working on. I missed getting a roll of garden felt, so I went back on Sunday. (We had the comfy duck sandwiches twice this year!)

6.2) I missed out on this size, but got a piece from the big roll 6.2) I missed out on this size, but got a piece from the big roll

There was more shopping, a bit closer to home, at Stash-it Fibre Festival in Kempville, Ontario (about a half hour south of Ottawa)

6.3) I seem to be focused on fiber acquisition again, I see more fleece washing in my future.6.3) I seem to be focused on fibre acquisition again; I see more fleece washing in my future.

 

September is Almonte Fiberfest (about half an hour west of the west end of Ottawa). I again did a “few” photos for the Mississippi Valley Textile Museum, who run the event (I hope I remembered to send them!)I am pretty sure I showed you the Booth Birds of a Feather by Catherine

7.1) Birds of a Felter booth, at Almonte FiberFest7.1) Birds of a Felter booth, at Almonte FiberFest

A few more fleeces to wash, the stock tank has been helpful, and fall seems to be holding off, so I may get these done before snowfall! One was a lovely but horribly dirty ram Shetland fleece

7.2) big Shetland fleece (looks like he took a mud bath before sheering)7.2) big Shetland fleece (looks like he took a mud bath before shearing)

 

In October, I tried a wet felted Slipper workshop with Ann. I was sure I could make a simple pair of slippers in a day…. No, not quite yet, it seems, but I had lots of fun, stayed reasonably dry and am looking forward to finishing up the slippers when I have another burst of energy.

8.1) Jan’s almost finished slippers at the end of Ann’s Class.8.1) Jan’s almost finished slippers at the end of Ann’s Class.

This month, I also spotted a cottage for sale, very close to my brother’s cottage. It had just had a major price drop, which might have potential, so worth taking a look at it.  There is also a Quonset hut, on about an acre of land, not too far from that’s for sale too. One is better for spin and felt in’s the other would be better for blacksmithing. At least neither is attached to a piece of protected swamp, which was almost everything I have looked at for the last few years!

8.2) cottage option8.2) cottage option

October is also the month for KanataCon Board game and Felting convention! They are the gaming convention with the HUGE second-hand game sale where I found a game about alpaca and one about lamas! I also got a lot more work done on the Mer-Boyfriend for Miss Mer.

8.3) Fiber related board games8.3) Fibre-related board games

8.4) Glenn with the young Mer-sturgeon now with bumps!! (on the mer not Glenn8.4) Glenn with the young Mer-sturgeon now with bumps!!

The day after the gaming/felting convention was a new Fibre festival in Merrikville Ontario. It was a nice drive down, fabulous weather for photographing the locks and a bit of good shopping.

8.5) Fall colours and the locks at Merrickville8.5) Fall colours and the locks at Merrickville

October was very busy. The day after Merrickville, we jumped in the car and headed for Toronto. We did a couple of shopping stops on the way to Oakville, but made it through all the Toronto Traffic! (Rush hour may be nearly 24 hours long!)

On Tuesday, Glenn and his brother did legal stuff, and I had a lovely day staring at architecture, photography, and felting.

8.6) Happy with his hand upgrade8.6) Happy with his hand upgrade

The next day, we stopped to shop with Monika at the Olive Sparrow on the way back to Ottawa. By the time we made it home, I felt wiped!  I think I could have slept for at least a week.

 

November arrived, and it’s time for the Guild Sale and Exhibition. This event is run by Ann, and I help where I can. I am still noticing I am not back to full steam yet. I usually can photo-document the event as well as run the music and demo felting. Not this year, photos and music were all I could manage. Most of the signage and layouts could be updated from last year, so not as much pre-work either. We had a couple of good felters with booths this year. If you check back in the blog, you will see the photos.

 9.1) Ann showing how a drop spindle works (she is wearing her new name tag) i cant remember when i made her her new name tag?) 9.1) Ann showing how a drop spindle works (she is wearing her new name tag).

At the end of November, I ran the needle felted landscape workshop. We look at wool in a painterly approach. Ann took this workshop and has been having fun with mist and trees!

9.2) November students and their felt Paintings (it looks like they had fun)9.2) November students and their felt Paintings (it looks like they had fun)

The next day, I got up nice and early and headed back to the guild. This time Ann was teaching, and I was the student. I was oddly tired (as if I had been very busy the day before) even before we started, but it was fun (and dangerous, you could get wet). I was able to get all the rolling done by the end of the class. I still need to do a bit more shaping to finish off, oh, the want of free time!!  I am not sure where all the time goes, but I seem to be missing more of it this year than usual!!!

9.3) my odd shape black hat in progress9.3) My odd-shaped black hat in progress. (Can you guess what it will look like?)

 

It’s finally December, and I’m not sure I was ever going to make it to the end of the year, but I am happy I did. I had a workshop teaching beginning Inkle weaving, with great students again!

9.4) Inkle weaving workshop9.4) Inkle weaving workshop

Inkle looms make straps, belts, trim, ties, and narrow woven band. It is usually woven where only the warp is showing, and usually the colour order of warping will determine your pattern. There is the option of Pickup (for which there are other better teachers), and I have taught the “inkle Two” class of many of the truly weird things you can weave on an inkle loom, but may or may not want to.

 

Throughout the past year, with the help of the other librarian, I have continued to volunteer at the guild library. I usually put in over 500 hours each year.  I am about to get to the number crunching for the library year end data. (which, considering my lingering deterioration of math skills, may make this more of a challenge this year)

I am glad this year is almost behind me. It was interesting to see what I did, even if I didn’t remember doing it, until I saw the pictures. The heavy fog seemed to go on for more than the first half of the year, with mini fog attacks even up to recently (I will be able to add again any time I want to soon). I am going to try to avoid having any anaesthetic for as long as I can in hopes my spelling improves, and my little bit of math comes back!!

 

I am optimistic that you are as excited and hopeful about 2026, it’s a pleasant shape, for a number, so I am optimistic. I also have some wet felting to finish and some dry felting to find! Have fun and see you Next Year!!!

8 thoughts on “My year in review; 2025

  1. WOW Jan I’m worn out just reading all that you did over the year considering the bad start you had. I do hope that next year is much better for you (and that you find where Miss Mer is hiding herself – she’s missed so much).
    The cottage and quonset hut look interesting, will we hear more about them?
    Do have a good remainder-of-Christmas holiday. Take care
    Ann

    1. Dear Ann, it was the strangest thing, i didnt remember quite a bit of last year untill i saw the photos! it was a very strange year and i will be happy to see the end of it.
      Yes i hope there will be more info on the cottage in the spring, it has lots of fiber arts protental and too many water craft.
      we are going to investages the Quonzit hut in the new year. its a huge mettle storage shed with a well and “Ruffed in Bathroom” (the sink is there but no pipes or toilet, not very Bathroom vibe realy). the cottage has too many pine trees and is having a drowt so blacksmithing is not a good option there. we will see what we can find out.
      i hope you have a fabulous fiber filled holiday and into the new year!!!

  2. It may have been the drugs but personally I like the idea of Mer men having six fingers Jan!
    Wondering if Glen’s “legal stuff” in October was relating to the huts?🤔 Interesting to see where this might go.
    I also like curvaceous, even numbers and agree 2026 has a good look to it! Let’s hope it brings us all good health and happiness and many more fibre projects🤩

    1. i might have left 6 fingers, if i had miss counted on both hands!! you are right it might be a Mer-type thing?
      unfortunatly legal stuff was getting his parrents estate sorted out so not as fun as a Quonsit hut. it would make a great spot to blacksmith, it is listed as light indutrial, well anvils are not light but they are lighter than tracktors. the land use would have to be changed to try to make it a place to stay like a cottage so that is why we looked at the cottage first. (and the price drop, who wants a cottage where the water is so low (ME!!))
      ooh i thot i was the only one that looked at number for there shape (but, for me, was a bit iffy about there meenings). i hope you are just extreemly ethetic about shapes (witch i susspect) and not that you have discalcula too!
      i am sure such a eligent number will not disapoint us, lots of fiber, fun projects and so much better than 2025

  3. You had a lot going on even if you don’t remember it. I think we juried a vendor at Spencerville and Merickville. I am hopping for a better 2026 it is a softer looking number. I look forward to seeing your cottage this summer.

  4. Glad you made it through the year Jan! That anaesthesia is bad stuff plus pain meds can throw anyone into a loop. Glad that you’re feeling better now and looking forward to a better 2026! You seem to have kept busy even if you forgot half of it. I look forward to more of your excursions in the new year.

  5. For someone who had a lot of brain fog, you got lots done (and had the wherewithal to register the occasions), well done! I wish I’d done the same…

    Here’s hoping you have no more need of anaesthetics in 2026, and may your maths skills come back with a vengeance (if they do, I’ll send some your way, *my* brain fog is still here!)

We would love to hear your thoughts!

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Discover more from Felting and Fiber Studio

Subscribe now to keep reading and get access to the full archive.

Continue reading