We had quite a response to our recent tenth anniversary giveaway post with over 175 comments. We’d love to hear from you more often on our regular posts.

The winners were drawn by random number generator and the choice of prize was given on number generated first through last of the 178 comments.

#1 – Kristina wins an online class of her choice.

Now on to what I have been working on. The photo on the left shows one of the nuno backgrounds that I made a while ago that has been waiting for further embellishment. I decided I wanted to use the photo on the right of weeping birch as inspiration. Now to find some fabric that I could applique to the background. I went through my entire stash and found absolutely nothing that would work. What to do? Then I was looking through the silk that I use for nuno felting and realized that I still had a piece of the same fabric. The original background was felted on to black prefelt. What if I used the same fabric and felted it on to white prefelt? That should give me trees that would work with the background but still have enough difference that the trees would stand out. I considered covering a larger piece of prefelt with the silk and then cutting the trees out after felting. But what if I cut the prefelt into tree shapes and then covered with the silk fabric and felted? A new experiment in felting to try!

I cut out the trees free hand, hoping for the best. Isn’t the difference in the background to the original fabric astonishing? The black wool really migrates through and changes the colors and values. The photo on the right shows how I cut the silk to “fit” the tree shapes. I left a border of silk to wrap around to the back side of the prefelt.

I then began felting the silk into the prefelt trees. I did rough up the prefelt a bit with a brush to get good migration of wool through the silk. I did quite a bit of rubbing and minimal fulling. I had given myself a bit of extra room for shrinkage, but not enough for complete fulling. since this is a piece of wall art, I wasn’t worried about the trees not being completely fulled. They just needed to hold together enough for me to stitch them down once dry.

The photo on the left shows the felted trees laying on the background. They have been appliqued down in the right photo. I used a medium value tan thread and the tiny stitches are hardly visible. I have also started adding a couched branch on the right hand tree. This is as far as I have gotten so far.

Here’s a closer look at the stitched branches. There will be more of this type of branch added to the left hand tree as well. I used bullion stitch to make the little seed poddy things at the end of the branches. I will probably add a few more thread colors to the branch.

I haven’t decided yet whether the trees are too much of a contrast from the background. I am considering adding some shading with grey on one side of the tree trunks for shadows most likely done with paint. I am going to add more small branches before I decide. What do you think?