I’m working on my grove of trees nuno landscape slowly. I think that some of you may think that this is a “find the difference” in the photos as they look pretty similar. But this is how I work, I add something, take a photo, look at the photo to see if it works, then add something else etc. That means there may be only one small difference from photo to photo, maybe I took something off, maybe I added something.

I had the background “horizon” and the large dark tree on the left when I left off. Now to add more trees. There are three little lines added on. These are the folded edges/hems of the nylon scarves I use to add layers of color. I usually just cut them off and don’t use them but I thought they might work for background trees. I tried maroon, yellow and orange. Not exactly what I wanted.

Then I added a mid tone grey one. I liked that better as it pushed the line further into the distance.

I added more mid tone grey trunks and moved the orange one closer to the “sun”. That looked better.

The I added a few more orange ones keeping them on the right hand side where the light is coming in.

I wanted to use more of the silk organza for a few more bigger trunks in the mid ground to foreground.

And a couple more smaller ones in the same deep red color. I was happy with how it was coming along.

Here I have added a few white “branches” to see what that would look like. I am inspired by Wolf Kahn’s tree paintings and was looking at several that showed white marks to denote branches like in this painting. I would need a lot more of the white lines to give the same effect. I will be pondering on that idea a while yet.

I decided I didn’t want to add too many layers without starting to stitch down the under layers. So I stitched the darker “horizon” background down to the nuno felt. Now I need to stitch the skinny trees down. I still need to figure out the foreground and there will be more layers of fabric on the larger trees. Still a long way to go. But I’m happy with my progress.