I sold three of my landscape pieces in March and I need to get more down to the gallery shop soon. So I took five pieces to be framed and I needed to make a few smaller pieces to go in ready made frames. The first one was easy, I made a replica of the holiday exchange card of winter time birch trees. I wrote a post about creating it here.

Here’s the second version. I forgot that I had used two layers of prefelt for the birch trees so they weren’t as white this time. But to me, it just makes it look colder!

Then I needed another idea. I have been watching some artist spotlight videos on the Youtube channel Fibre Arts Take Two and had seen one about the felt maker Kristy Kun. There were several short segments in the video that showed a bit about her process which looked interesting.

Then I walked by this small piece in our living room that I created in Level 3 Art and Design. It’s made with paint, gel medium and cardboard. Perhaps I could recreate this design in felt? And I could attempt some three dimensional felt on the horizon line with a similar method to the video I had just watched.

I first laid out wool in similar colors as the original. I should have noticed at this point that the horizon line was too close to the center vertically but I missed that.

Then I laid out some strips of the dark red and black mixed together in different sizes.

Then I began felting. I only wanted to go to the prefelt stage with both of these elements. The red bits reminded me of bacon the entire time I was felting.

The strips seemed too wide for what I had in mind, so I folded them in half lengthwise and ironed them. Once I figured out what I wanted the arrangement to look like, I began stitching them in place. I used a thread that would blend in so I wouldn’t need to take it out.

Suddenly, I remembered that I was supposed to needle felt these in place before stitching. No worries, I went ahead and needle felted the already stitched pieces and kept going.  Once everything was in place, I felted everything together. I spent a lot of time rubbing the strips in place and making sure that they were holding on to the background felt. I even tried a little underwater felting as I had seen in the video.

Here is the end result. I am happy with how it came out and it is well attached between the strips and the background. It didn’t shrink down as much as I wanted so I will need to find a bit larger frame for it. And I might remove a bit of the bottom to make the horizon line a bit lower. It was a fun experiment and hopefully, someone will love it and take it home.

Post edited to add final photo.

Here is the final photo of the piece in it’s frame. I did trim a bit off the bottom to change the horizon line a little. The frame is 8″ x 10″.