Browsed by
Tag: 3D felt landscape

Third Quarter Challenge – Rothko in the Round

Third Quarter Challenge – Rothko in the Round

Comments 11 comments

I’m just squeaking in under the deadline for the third quarter challenge. I had a hard time deciding what to create. Finally, I fell back on experimenting with layered color mixing. I have always thought that Mark Rothko’s paintings would work well as an inspiration for this technique. So I searched for a painting of his that was created in the 1950’s. I found number 10 painted in 1950 at MoMA’s website.

With my inspiration in mind, I was planning on making a flat piece of felt but then Ann posted about creating some lantern covers.   I decided I would give that a try and see how light would affect the color mixing as well.

I didn’t have any tall glass vases like Ann used but I did have an olive jar that was the same shape mostly. I could use that. I created a resist to include approximately 30% shrinkage and got out my stash of short fiber merino. I didn’t really have enough of the blue for the first layer but decided to go ahead and wing it.

The short fiber merino that I do have is in batts, so I wrapped the blue around in the vertical direction for the first layer.

Then I added more colors in layers wrapping the resist horizontally. These were all solid colors to start with and I wanted to see if the movement/migration of the fiber would create a more mottled look like you see in Rothko’s paintings.

I did add a bit of dark grey at the top for a deeper value. The photo on the left shows the piece after layout and wet down. The photo on the right shows the piece after felting before I removed the resist. You can definitely start to see the color migration. I cut out both ends of the resist and as you can see at the bottom of the right photo, the blue wasn’t covering the ends completely. But I decided to leave the ragged edges as the Rothko piece felt like the paint had ragged edges. Then I fulled the piece and pulled it over the glass jar to hold it’s shape while it dried.

Here’s the result. It looks very much like a landscape to me and the color mixing worked just as I wanted. You can see the top of the glass jar in the photo on the right. I would prefer a smooth vase and I will have to go and look for some at the local dollar stores. I did try a light inside but I made the felt too thick for that to have much effect at all. But I do like the possibilities of this technique, creating thinner layers next time. I hope to create some landscape lanterns with real glass vases. Thanks for the idea Ann and thanks for the challenge Lyn and Annie. It made me try something out of my usual box.

3D Felt Landscape

3D Felt Landscape

Comments 20 comments

I sold three of my landscape pieces in March and I need to get more down to the gallery shop soon. So I took five pieces to be framed and I needed to make a few smaller pieces to go in ready made frames. The first one was easy, I made a replica of the holiday exchange card of winter time birch trees. I wrote a post about creating it here.

Here’s the second version. I forgot that I had used two layers of prefelt for the birch trees so they weren’t as white this time. But to me, it just makes it look colder!

Then I needed another idea. I have been watching some artist spotlight videos on the Youtube channel Fibre Arts Take Two and had seen one about the felt maker Kristy Kun. There were several short segments in the video that showed a bit about her process which looked interesting.

Then I walked by this small piece in our living room that I created in Level 3 Art and Design. It’s made with paint, gel medium and cardboard. Perhaps I could recreate this design in felt? And I could attempt some three dimensional felt on the horizon line with a similar method to the video I had just watched.

I first laid out wool in similar colors as the original. I should have noticed at this point that the horizon line was too close to the center vertically but I missed that.

Then I laid out some strips of the dark red and black mixed together in different sizes.

Then I began felting. I only wanted to go to the prefelt stage with both of these elements. The red bits reminded me of bacon the entire time I was felting.

The strips seemed too wide for what I had in mind, so I folded them in half lengthwise and ironed them. Once I figured out what I wanted the arrangement to look like, I began stitching them in place. I used a thread that would blend in so I wouldn’t need to take it out.

Suddenly, I remembered that I was supposed to needle felt these in place before stitching. No worries, I went ahead and needle felted the already stitched pieces and kept going.  Once everything was in place, I felted everything together. I spent a lot of time rubbing the strips in place and making sure that they were holding on to the background felt. I even tried a little underwater felting as I had seen in the video.

Here is the end result. I am happy with how it came out and it is well attached between the strips and the background. It didn’t shrink down as much as I wanted so I will need to find a bit larger frame for it. And I might remove a bit of the bottom to make the horizon line a bit lower. It was a fun experiment and hopefully, someone will love it and take it home.

Post edited to add final photo.

Here is the final photo of the piece in it’s frame. I did trim a bit off the bottom to change the horizon line a little. The frame is 8″ x 10″.

%d bloggers like this: