Felting and Fiber Studio

A few weeks ago, I turned my attention back to working on the latest Mer-person (the boyfriend for Miss Mer) and realised I had a small problem. It is very fixable, but I thought you might like to chat about what and how it happened.

A quick review of the newest Mer-persons progress so far;

1.1-1.2) 05-2025 Cangames (you can see what happens if you get distracted winding fingers…I fixed that too.)

1.3) 06-04-2025 Mer-boyfriend trying to get me to rush his felting

1.4) 06-15-2025 Blacksmithing weekend and felting the mer-boyfriend

1.5) 07-14-2025 Social

1.6) 08-08-2025 Friday Twist shop and demo

As you can see in the review, I had a few problems with counting fingers and rushing to build up the shape. I do have an excuse, as I started this project, I was still heavily distracted by lingering anaesthetic. I think there may be a few tendrils of the stuff still clinging to bits of brain, but most of it has now left the building. (Yah!)

When I was wrapping, especially in the Fish parts, I had not kept the second layers of wrapping as tight as I would have liked. This was exacerbated by starting to block in the superficial features before getting the understructure as firm as I would like. This meant that the Fish parts were now close to the correct shape at the surface, but squishy if you applied pressure to the felt. Squishy does not suggest strong young fish!!! (Fish also usually do not have the ability to fold mid fish.)

Working on superficial features (shallow poking of the wool with 38T333 and 42T222 needles) gave me a nicely felted surface with a much more loosely felted under layer. (I got excited, I jumped ahead and started into the fun sculpting, before a firm under layer was achieved!)  Well, that is not what I was wanting. How am I going to fix that?

2.1) Diagram of superficial felting with a less felted core.

Since I am still working on the understructure, I can fix this now without too much difficulty. I will need to move fibre at a deeper layer, and since I am making the under structure, not the finished surface layer, I don’t have to worry about surface pitting if I move to a courser needle (a 36T-333). Pitting is telling you to keep felting, until the raised area (the parts not yet felted) is even with the lower spot (which is felted more).

Why would I move to a courser needle? I want to move fibre, but I will not be adding more fibre superficially at this point. Also, if I work deeply with a finer needle, it is more sensitive to minor directional changes (which can lead to OOPS!!) I would prefer not to have to go searching out broken needle bits from his fishy parts.

Synopsis: A Courser needle is more aggressive when moving fibre, and is less fragile than a finer needle, especially when working deep into the under layers.

 2.2) Diagram inserting the needle deeper to affect the under layer

Synopsis: The barbs affect the fibre by grabbing one to a few fibres as they are passing through. If you only work to a shallow depth, you will only be affecting those fibres. If you are working to a greater depth, you will affect the fibres that are located there and some of the fibres above them.

There is another way squishy interior felt can occur;

As with Wet felting, some breeds of sheep have fleece that is less inclined to create a dense felt than other breeds. I have had trouble with a couple of the Rideau Arcott fleeces (created with a mix of breeds) I have used. No matter how much needle felting of that wool I did, it remained spongy, but it was holding together, so it was felted.  A Less than appropriate wool choice is not the problem this time, since I am using Corradale carded roving, which I have used before without problems.

Before I started to firm up the understructure of my fish person, he was able to fold his tail tightly in half and fit in the smaller project bag. Now, after hours of poking, he will have to go into the big project bag.

3.1) 10-05-2025 Slipper workshop (I think the wetness was too much for him?)

He now bends and stays in position, but no longer stays when the bend is extreme. (The increase in felt stiffness has strengthened the wool. He is poseable, but the wool felt is getting closer to overpowering the wire. I can stop increasing the firmness now, and work on adding more of the understructure superficial detail and the missing fins. (I will return to shallow poking rather than deep stabbing!)

I should mention the importance of gauge choice and wire type for your armature. It is important to figure out the gauge of wire you need for the size of your sculpture, and the pose or position you would like your figure to be in. You can make a blind guess, an educated guess from previous experience, or you can make samples. (I know some fiber artists, I am looking at a couple of my weaver friends, who are vary avers to sampling but it can be both educational and inspirational even if you don’t get the result you expected.) 

I organised a study group during COVID to make samples of various gauges of mainly aluminium and Steel (floral) wire. It gives me a reference sample I can use to select a good wire gauge to try for a new project.  (Before the samples, I could adjust the armature to make it stronger by adding steel floral wire to a limb to give it more strength. This can be done over part of the wool under structure, as long as more wool would be added on top.) I have also had to add lateral supports when the lumbar spine of Mr. Mer broke (I wound up doing surgery with a sharp awl, inserting Harrington rods running up each erector spinae muscle and down into the upper Hamstrings.)

  4.1-4.3) 01-19-2022 Mr. Mer’s Fishy parts, augmenting armature after felting is well underway. (Insertion of Harrington rods in progress) fixing this far into felting becomes harder to hide the surgery, but not impossible.

With armature wire gauges and felting, you have 3 options for outcome.

1) Wire overpowers wool (felt):

• The wire holds the wool/felt staying in position when posed.
• A lighter gauge of wire could have been used and still held the wool in position (working with heavier wire than you need can stress your hands and may develop metal fatigue if you are moving the figure often)

2) Wire = wool (felt):

• The wire holds the wool staying in position when posed

This is the balance you would like to achieve, since you will not have worked with over-stiff wire.

3) Wool overpowers wire (felt):

• When posed, the wire is moved out of position by the density or strength of the wool.
• Augmenting the armature might be possible if you catch the imbalance before you finish the understructure. It is increasingly difficult to strengthen the wire the closer you are to finishing the sculpture. (but you can see with Mr. Mer it is not impossible to strengthen the armature quite far into the felting.)

If you have the opportunity, you may also want to make samples of various gauges of wire or combinations of gauges if you don’t have access to a full range of aluminum and floral wire (there are sources online if you can’t find a range of wire locally).

Investigate locally easily available types of wire first. One of the English felters uses rubber-coated garden wire for armatures.  A few felters on YouTube, like pipe cleaners, but craft pipe cleaners are weak compared to the strength of other options. If you are doing very lightly felted structures  (a lot of the faceless fairies are only lightly felted), pipe cleaners might work to su0pport the wool. What pipe cleaners are very helpful for is wrapping around your armature, to help secure the wool as you wrap it. Cheap quality pipe cleaners, in areas of high humidity, have another problem: they can rust.

As you find more gauges and types of wire, make samples of them too. Keep notes, was it easy to shape or twist, or did your hands tire quickly? (Note: Uncoated aluminium will leave marks on your hands.) Also, try a gauge and augment it with a second finer wire too; it will give you more options if you don’t have access to a full range of aluminium and floral wires. I made a series of legs, with feet, and to test floral wire as fingers, I made arms with hands. I can now refer to the samples when I start a new project.

I have been puttering along, firming up his fishy bits and then moved on to work on his upper musculature. I will have to print off another set of photo-reference if I cannot find the book with the last set. (found it!)

5.1-5.2) The fish parts are now quite firm. I think I am almost ready to start adding the little spikes.

I will try to remember to take some more in-progress shots while I figure out the fish details. I apologise! I am afraid that for this part of “stiffening-of-the-Fishy-under-structure” felting, I climbed into bed with a big pile of pillows and felted while listening to the end of the new Lynsay Sands vampire book. Then started the latest Wen Spencer (this one has a vampire and werewolves) audiobook, and forgot to bring the camera! (Needle felting in bed is not the suggested location for optimal felting and avoiding self-stabbing as you fall asleep while felting…. a table is really a better choice)

5.3)Some of the sturgeon reference photos I have collected, focusing on the spines/spikes.

What’s next;

You may remember last year, about this time, was the Kanata games (and felting) convention (last year I found a sheep game). It is coming up, and I wanted to have most of the basic shape blocked in and firmed up so I could start working on the fiddly bits of the ridges and rows of spikes. If all is going really well, I hope I can start to add some of the colour layers during the convention.

PS: I can think of a reason you may like to have that firm outside and softer felted inside. I am sure one of my cats would have appreciated something to pounce on that squished in a satisfying way.

One way to achieve this would be; wrap your fist layer securely (around the armature, if you are using one, which will keep the felt from rotating around the armature), then wrap the next layer a bit looser. Then, focus the majority of your felting on the shallow depths, and you could recreate the squishy inside effect. If you wrap around a bundle of fresh catnip leaves, it will be even more appealing. Just make sure the outside is well felted, so no one can tear off and eat the wool, to get to the catnip!

Even from what is technically an anaesthetic-incused mistake, you can notice something and save that thought for later use. Who knows when it may be a useful idea?

I will update you on his progress at the convention!  Maybe there will be more felters this year! Stop by between games if you are there. I hope you too are enjoying this late summer/not-really-fall and getting the last of your summer fibre purchases washed, before the weather remembers to look at the calendar and realise we used to have snow in about 2 weeks from now. (Really, there is no rush! I am enjoying this not-fall and am perfectly happy not to be having snow any time soon!)

PSS, if you would like to comment on any of the posts you read in the blog but cant find the comments button, it has vanished from the end of the post! (it is either very shy, or trying to avoid work) since it is now hiding all the way back at the top of the post (where no one would ever think to look for it! silly button you have been found and will hopefully be put to work!)