Felting and Fiber Studio

In May this year, I wrote about about a vessel I’d made for an exhibition called ‘Edge’.  Although this hadn’t been the intention, the vessel gave me a sort of Japanese minimalism vibe, which was something I wanted to revisit.

The vessel fit the Edge brief in that I’d used a circular resist to create the shape but rather than cut the hole in the centre of the circle, I’d stood it on one edge, with the hole on the opposite edge.  I like this shape and want to explore it further.

The fibre I’d used was something I also want to come back to.  A beautiful fine carded merino and silk mix from World of Wool, it was time-consuming to lay out because of the short staple-length, but produced a lovely, light and velvety soft felt.

Before leaping into making something with so many variables of shape, surface design and fibre, I knew I needed to make some samples and decided to think first about the surface design.

I have no real knowledge of Japanese minimalist art and am not trying to replicate it, just play around with some of the simplicity of design and colours as inspiration.  I love problem-solving (or perhaps that’s problem-investigating) so was setting myself a bit of a challenge.

I’ve seen various images of beautiful Japanese brush work using black ink brush strokes and red circles on a white background and I wondered if I could create something like that in felt. The biggest challenge seemed to be how to wet felt black, red and white together while keeping the colours separate. Prefelt seemed to be one way to go so I made three different black prefelts to see which might look like black ink brush strokes.

Using commercial black merino prefelt, I cut a strip and felted it a little. I didn’t think this would work well as it’s the cut ends that move most into the surrounding fibres and this strip is basically all cut edges. Next, I tried lightly prefelting two other types of black merino wool: carded and tops, as if I was starting to make felt rope.

The tops and carded wool produced very similar-looking results and I confess, when I got to the making bit, I lost track of which was which. The advantage of these was that the fibres are mainly running along the length of the line rather than sticking out of the sides so there should be less migration into the white. I decided I’d use these rather than the commercial prefelt strip.

I then turned my attention to red circles.  I suspect carded wool might be best but I only have tops in red so that was what I used.  First, I just tried making a circle freehand.  I got about 2/3 of a circle and a raggedy bit.  On the plus side, there weren’t cut edges, so that should help minimise side-to-side fibre migration. On the minus side, the shape left a lot to be desired!  Needs further work.

Next, I made some red prefelt and cut a couple of circles out of it.  I thought this would work less well but I was interested to see how they compared with the freehand idea.

 

I was aiming for a very simple design, so played around arranging black strands and red circles in different combinations.

Now to actually make a sample.

I used a rectangle of white silk and merino commercial prefelt for speed, and felted it together with three black strips and a red circle to see what happened.

As you can see, the black didn’t migrate much on the long sides, though it did where I’d cut the shorter pieces (on the ends on the left side).  The lines did, however, crimp and move a bit – maybe I need to prefelt these a bit less on the length and definitely more on any cut ends.  Also, I must keep a better check on any movement as I felt.

The red, on the other hand, probably needed prefelting more as there was quite a lot of migration there.  Basically, far too many loose cut ends, so either felt the edges harder or go back to a different layout.

At this point, I wonder why the heck I’m doing this: the layout looks so much better than the felted piece.  Nevertheless, I decide to make a quick second sample before I finish for the day.

This time I used the freehand red circle with the raggedy edge. Somewhere in the dusty corners of my brain, I’d started to think about using resists to reveal the colours rather than just laying them on the surface.  I hadn’t actually developed this thought but just plonked a resist on top of the red felt and laid a second layer of the white over the whole of the piece.  I had some vague thoughts about the red incomplete circle looking a bit like a setting sun so placed it near the bottom and thought I could perhaps print some flying bird silhouettes on the upper part afterwards.

OK, I’m sort of freewheeling by this stage.

 

The useful learning from my experiments thus far was that the freehand circle (which has fibres running around the circumference of the circle, therefore avoiding lots of ends sticking out) works much better.  You can see this very clearly from the under side.  The cut ends clearly also migrate much more up and down as well as side to side. The freehand shape was probably also felted a bit harder than the red prefelt sheet.

 

For my final two test pieces, I lightly needle-felted some red circles then wet-felted the edges to make them as neat as possible. I went back to using the original white carded 70:30 merino:silk mix and decided to concentrate on getting the red circle right.  I laid out two layers of fibre at right-angles to each other and put a needle felted circle top right.

The needle-felted circle felted in well and when it was dry I printed a tree onto it.  It’s a bit big but I’m going to make this into a birthday card for my Mum.

For my final test piece I continued with the carded merino & silk batt.  I laid four layers of fibre round a circular resist and added one needle-felted red circle on each side.

As with my earlier Edge vessel, I cut it on one of the edges (rather than in the centre of the circle) and designed it to sit on the opposite edge.

Part-way through fulling, I worried that one of the red circles hadn’t felted in very well so did a little judicious needle felting around its edges before finishing the vessel.

This is a lot smaller than my original ‘edge’ vessel and much sturdier.

Conclusions?

The needle-felted and freehand wet-felted circles work better than cutting the circles from prefelt. I like the effect though could maybe make the need-felted circles a bit thinner: they do look as if they’re partially sitting on top of the surface.  I’m happy that I’ve more or less cracked that bit of my challenge.  As for the black lines, I’m leaving them for now but may come back to them at a later stage. The carded merino / silk batt was lovely to work with and I will definitely be making more things using this fibre. I might make a series of vessels using different colours and / or numbers of circles. I may also develop combining a circle and a printed tree. As usual, each experiment opens up lots of new possibilities. So much felt to make and too little time…..