Demoing Felting Question: “How does that work?”

Summer is the season of planned and spontaneous demos.  Whether it’s planned, demonstrating felting at fairs, craft shows, fibre or yarn stores, or less planned, felting sitting in front of your home, or waiting at a doctor’s office,  it’s an opportunity to introduce others to the fun of felting. I wanted to chat about this today, since I have recently overhead others say they haven’t signed up to do guild demos because they don’t know what they will get asked at the demo. Also, they have never demoed before and feel that they need to be really good to demo.

Demos are an opportunity for us to show others what cool things we are doing. We don’t have to be masters at what we are showing, but we have to be enthusiastic (without scaring the public) and look like we are having fun. Seeing someone who is enjoying what they are demoing is likely to inspire someone to try whatever they are doing. It is also good to see someone who is just starting to let others know they can do this, too.

 1) 2019 Wool Growers Co-Op Demo

If you have never demoed before, try a group demo where you are not alone and have others who can answer questions and take the lead.  You can also just bring your felting with you when you will be waiting somewhere for a while, like the doctor’s office or emergency department, most people will just smile and watch. (They are usually happy to have something to distract them from why they are there. It’s a good way to get used to being watched while you’re working.)  Spinning is particularly popular with people in the emergency waiting room.

I have found that at most big demos, I have to start talking to people before they will approach. When I first started to demo, it was weaving I was showing. If someone seemed curious, but not brave enough to ask what I was doing, I would ask what type of loom they had at home (even when I was reasonably sure they had never seen a loom before). They usually laughed and started talking to me, often about their grandmother’s spinning wheel! (We will not discuss today anyone loudly saying “look she is making wool!!” while I am spinning, or “Look she is spinning!!” when I am weaving. It’s a bit trickier, so getting Sleeping Beauty’s spindle wheel confused with Rumpelstiltskin’s flax wheel is slightly understandable.) Nevertheless, it was an opening, and I could tell them about the magic of watching cloth appear as you change the order of harnesses, which changes the pattern.

 

Now let’s consider what seems to be the most scary for new demo-ers, what am I going to get asked?

First, you are not required to know everything to demo! If you get a question you don’t know the answer to, admit that, and suggest they contact the local or online group. You don’t have to be an expert! Enthusiasm and looking like you are having fun will inspire others to try. That said, whether I am demoing needle felting in 2D or 3D, I most commonly get a few questions repeated as I am working.  Let’s take a look at some of the most common questions.

The first is “How does that work?”

If you don’t know how the needle’s barbs grab the fibre and push it into the felt or ground fabric, it does look like magic.  I try to show them the barbs along the working part of the needle. If you have a course needle, it’s easier for people to see or feel the barbs (32g or courser).  If they are having trouble seeing, I let them hold the needle, warning them the end is very sharp, and have them run their fingernail over the area where the barbs are located.

*I did have one person tell me they had tried using a needle to felt and it hadn’t worked at all. After I showed her the barbs on my needle, she admitted she had tried a sewing needle. I can see why she was having trouble getting the wool to felt.

 

2.1) Doer felting needle 32G

2.2) Doer needle chart for triangle needles

2.3) 2019 small muskox landscape, Demoing at a social, under drawing and adding wool, finished image

 

Common 3-D Question:

When I am working on a 3D piece, I get asked variations on “how do you move the wool where you want it to go?”.

First, the wool moves in the direction that the needle is travelling. Poke in the direction you want the wool to move. While also being aware of the position of your barbs, and thus your working depth, so you are getting the barbs to entangle or move the fibre to the location you want it to be.  It’s easy to say, and sounds simple, but I have seen beginner felters poking vertically (up and down), while trying to move the wool horizontally. It would be more effective if they poked the needle horizontally (moving left and right) or rotated their shape to align with the direction the needle is moving.

You can get quite devious with this concept.  While working on a sheep broach, I had the face quite sheepish, but the nose was not as firm as I wanted.  Who wants a soft-nosed sheep, that is just flaccid, or a limp-nosed un-sheepish aardvarkish-sheep?  If I poke from the outside, into the nose, I will distort the nose, and I will have to add more wool and reshape it.  There is a second way to firm up under a surface structure that you are already pleased with, if you have not finished sculpting the back side. You need to know where the first barbs are on your needle and how far to push the wool so the needle does not emerge past the finished surface.  In this case, I worked from the back of the head, pushing fibre through the sheep’s head broach towards the nose, from the back, to firm up the nose without changing the outer surface. It’s sneaky, but it works.

3.1) Moving the wool to firm up the face if needed.

3.2) 2020 demoing for the delivery guy sitting by my side door

I also usually explained that needle felting sculpture is both additive (like clay) and Subtractive (like Stone). Usually, you use some of both concepts when you sculpt with wool.

Additive:

• You can make a shape and then add it to your creation. Sara from Sarafina Fiber Arts (lots of YouTube videos, including the Mermaid feltalong) works a lot this way. It has the advantage of being easy to explain what you are doing and is repeatable by other felters.
• You can build up a body by layers of muscle, which is a great way to study musculature, but not a fast way to sculpt. Most sane people just add the general superficial musculature in a simplified form. You can also just go for cute and make more of a caricature of what you are making.

4.11) A circle of fibre, needle felt across the diameter, then fold in half. Felt along fold line and as far down as needed, leaving an unfelted fringe giving an edge to attach to the main shape.   Sara creates most of her sculptures this way.

4.12) adding fins that have been pre-shaped and the attachment edge left loose to allow it to be secured to Shark Boy

Subtractive:

• If you poke in the same spot repeatedly, the fibre under that spot will entangle and compact. Visually, you will see the area that is being poked indent. Which looks like you have removed the wool above the dented area, while in fact it’s just compacted the fibres and moved them in the direction the needle was pointing.

4.2) Stabbing repeatedly in the same spot will both indent and compact that spot relative to the surrounding area.

Hybrid – working with loose fibre (using both additive and subtractive methods to sculpt):

• I often use loose fibre, use a few pokes to attach it to the area I want to sculpt and then, by careful poking, shape it into what I want to see. I tend to do this more when I am building up the under structure. But sometimes for adding detail, too. This is not as fast as remaking a shape and adding it, but it’s a lot of fun.

4.31- 4.32) Miss Manta demonstrating adding loose wool and sculpting it into place.

 

Common 2-D felting question:

When I am working on a picture, people will stop and watch me add small wisps of fibre, layering them to get to the depth of colour I want.  “Oh, I would never have the patience to do that!” OK, that technically isn’t a question, but that gives me the opportunity to talk about the various ways you can approach making a picture with needle felting that they could use.

Like a pastel: (usually a good approach with landscapes)

• Working from the background towards the foreground.
• It is easier to overlap images and create depth.
• This usually makes the most sense for most images as an order of working.

Treating wool/fibre like a watercolour: (slow but impressive results)

• Slowly layering tiny bits of fibre like washes in water colour painting. The transparency of the application allows the upper layer to be affected by the under layers. If you have lots of patience or just like to putter on a project, this may be your choice.

Like an acrylic (paint by number or colouring books): (much quicker than working like a water colour)

• If you use a small window to isolate part of your reference image, you can match the colour you see in the little window, mix that colour, and then add it. Move to another spot and match and add that colour. You can think of this more like a paint-by-numbers kind of approach.
• You can mix larger amounts of colours that occur in various parts of the image, which gives the image cohesion and it’s faster than mixing the same tone multiple times.
• This is quicker than working like washes of watercolours.

Using a bit of each approach:

• If you use the work order (like a pastel) from the background /mid-ground /foreground
• Use colour matching to lay out the main parts of the picture, then
• Use wisps of colour for blends and highlights in the blocks of colour.

5.1-5.2) 2018 Makers fair demo

 

I also get asked about “What fibres are you working with?”

This gives me the opportunity to talk about different properties of fibres. We can use lots of different kinds of fibre, sheep, alpaca, lama, Dog, Cat, Yak, silk, even plant and manmade fibre.  I can show on the fox picture that some of the cream coloured fibre is cat hair. That there is silk in some of the highlights, and the whiskers are horse hair, but I am looking for the outer guard hairs of a muskox, which I think will work better. Most of the rest is various breeds of wool.

• Different types of sheep have different wool properties. (light reflection/ texture/crimp) fibre preparation; carded or combed, can also be used to affect your picture)
  • Merino absorbs light, so it works wonderfully for shadows
  • Bluefaced Leicester has a higher light reflection, so it works well for highlights
  • Shetland and Coriedale are what I tend to use for most of the image
• We can also use fibres from other fur-bearing animals; dogs, cats, llama, alpaca, muskox, yak, bison, angora goat or rabbit, etc.

“Where do you get your fibres”? It is usually the next question.

• Local yarn or fibre shops, online, and local farms.
• Try to give a few options that are near to where you are demoing, if possible

6.1) 2017 Ann demoing the Blending board at the carp fair

If the demo is at a fair or large event, remember you may only get a few minutes of their time,  so give the brief version of an answer (I have trouble with this. I can be verbose, I know you are shocked to hear that!). If they don’t look like they need to leave, you can either go into more depth or ask them if they have more questions. If they look interested, but rushed (kids are trying to drag them away to the rides), try to have contact info for the local group that they can track down later. A business card is great to hand out, or a sign with the contact info that they can take a photo of and consult later is helpful too.

6.2) 2019 Farm show demo, part of the table display

6.3) 2025 Dickonson day demo, Amanda getting help with her spinning

 

Synopsis:

Smile, engage people by asking them questions, show them what you are doing, and have a contact for more information (it can be an online option if you don’t have a local guild/group). If you don’t know the answer, say so and suggest they contact the local group for more information.

The three important concepts for needle felting are

• Rule 1) the sharp end of the needle goes in the wool, not your finger (following this rule saves on bandaids)
• Rule 2) the needle goes into and out of the wool in the same vector (no changing direction as you poke), and
• Rule 2.5) The direction you poke is the direction the wool will move.

I hope this gives those who have not tried demoing yet some encouragement. It’s lots of fun and you get to meet future fibre people! Have a wonderful long weekend, Monday!  The next long weekend will be Labour Day Monday,  September 1st, 2025! Have fun and keep felting!