Creating a Branch, Leaves and Lichen for a Felt Tree Trunk
In my last post, I showed you the beginnings of a tree trunk that I have been creating. Next up was to make a branch, leaves and lichen for the trunk.
The branch was made from the fringe that I cut off when I felted the tree trunk. There is extra fringe at the top of the photo above and the branch that I created from a similar piece of scarf below. I did a bit of twisting, tacking it down with a felting needle and then wet felted the branch.
I painted some lightweight interfacing and some nylon organza to make the lichen. It was fun to make lichen in purple!
Here’s the set up that I use for burning synthetic fabric. It gives off bad odors so I put a piece of glass on my stovetop, turn on the fan in the vent hood and burn with a soldering iron first. Once I get the shapes, then I use a heat gun to further shrink and change the shape of the fabric. It shrinks the fabric down, so you need to burn out more pieces than you think you need. (Make sure to be very careful with the soldering iron and keep it away from your fingertips. You also might want to wear a mask.)
Here’s the burnt interfacing on the left and the result after heating with the heat gun on the right. I usually tear these pieces up into smaller sections as that looks more like the way lichen grows on tree trunks. Do you like the little dog at the bottom? Totally unplanned.
Here’s the nylon organza. I do both the interfacing and the organza because they each give a different texture. That way when mixed together, it looks more like real lichen.
Next up was to create the leaves. I used tea bag papers that I painted. I wanted a soft peach-pink color but ended up with more of an orange color. Oh well, I kept going. The top right shows the tea bag papers layered with two papers and then free motion machine stitched to make veins. Then I cut out the leaves to the correct shape and then used a soldering iron to burn bits away and make little holes. Now they look like fall leaves.
But I was still unhappy with the color. I definitely wanted them less orange and more pink. So I took some leftover tea bag paper and tried several different media to see what I liked best. I ended up using the pink colored pencil. Now to stitch it all together and see if it needs anything else, but you will have to wait until June for that post.















20 thoughts on “Creating a Branch, Leaves and Lichen for a Felt Tree Trunk”
The colours in your original scarf were lovely and had it not been “religious” (holy!) it would have been beautiful. I’m glad however that it didn’t work because it does make a fabulous tree, and I love the way you have turned the fringe into a branch. The lichen is so lifelike, and having seen your leaves before I know that they will too (except they are dead but I didn’t like to say deathlike).
That’s a great tip about using your stove and extractor fan as a base for working on stuff that gives off noxious gas. I tend to do burn tests there but it’s never occurred to me to turn on the fan – doh!
Serendipitous dog! Actually I can see another one sitting at the bottom of the left hand photo, it looks a bit mangy and sad though.
Waiting for the next episode with bated breath.
Ann
Thanks Ann, glad I could help with the stove/fan idea. It took me a while to figure it out 😕
I think I see the other “dog”🐕
This is a great post, thanks. I love lichen & these ideas create a really lifelike effect. I’ve only been felt making for about 12 months but luckily my teacher loves me to experiment as much as I like experimenting. She has a special bag with my name on that she brings each month to support my ideas! It’s many years since I worked burning & heating materials to change their textures but I’m excited to get busy. Thanks for the health & safety tips.
I’m glad you enjoyed the post. Experimentation is the best way to learn, I experiment and make samples all the time. Have fun making lichen 😊
I’m sure I’ve asked this before Ruth, but – the leaves – is the paper actual used tea bags or is it a sheet of the paper used to make tea bags? I ask because most teabags over here now are only paper – with no plastic content (so they say). I’m wondering if burning holes with the soldering iron would work on just painted paper without setting light to it! Hmmm …. I wonder if coffee filters would do just as well or tissue paper painted with coloured PVA?
I guess I’m going to have to start experimenting. Damn, another rabbit hole.
Ann
The leaves are from used tea bags. They do have a tendency to catch fire but I watch carefully and blow out the flames. I’m sure that other types of paper would work, perhaps giving a slightly different look??
I like the organic feel of staining from the tea.
Using the fringe for the branch was a great idea!
Good job no-one came home, saw you busy at the stovetop, and wondered what was for dinner as it didn’t smell too good 🙂 But the lichen looks lovely!
Burning bits away on the leaves makes them look realistic.
Looking forward to seeing the next post!
Ha, you made me laugh. My husband is used to my “shennanigans” around the house. But perhaps I can get away with not cooking dinner and serving lichen for dinner. 😉
I had the same question as Ann, Ruth. Was tea bag paper a special purchase or tea bags and I can see your response . For years I did not realise that there were microplastics in tea bags and when finally the tea producers here (we are a nation of tea drinkers!) cottoned on to dropping sales, they became biodegradable so lost their plastic element. So now I am wondering about whether the bags from fruit teas would provide the colour you were looking for. But as always you devised a solution to create the colour you needed.
I often think that your posts are like watching a sped up camera in these nature programmes on TV. I love to see the evolution of your ideas and your creative steps.
Looking forward to your next post.
Helene x
Thanks Helene, I didn’t know about the microplastics in tea bags either until a year or two ago. I’m not sure if they have been changed in tea bags sold in the US. Europe is much more progressive about those things than the US is. I actually do use some tea bags from fruit teas and they do give a bit of a different color. I like to use different ones to achieve a more natural variation in colors. Glad you like watching the process 🙂
Your tree bark & branch are a fab construction but wow the lichen is right up my street….no surprises there! Love your serendipitous canine creation too.
Your teabag leaves are great, especially with the added stitching.
This paper is great to experiment with, but have you tried what currently sells as chamois for cleaning windows (back in the day, we used to use a piece of real chamois leather!)? I have had some interesting results.
Thanks for the great H&S suggestion I need to file that tip away. As I don’t have an extractor hood I do my burning immediately adjacent the sink and open window….great for putting out a flame or three! 🤪
Xx
Thanks Antje! I figured you would like to see the lichen as you have done so many samples of lichen yourself. I have not tried the chamois (whatever it might be made from) as a sample. I will have to keep that in mind for future.
I used to do my burning in front of an open window but found the smell was still getting in the house. I like to work outside too if it isn’t too windy or cold.
Ruth, your lichen is delicate and pretty before, and then it becomes lovely and lifelike. You’re so talented. I thought your idea to use the fringe, and turn it into a branch was very clever. The leaves made from tea bag papers is a nice way to use something that is otherwise thrown away, and the stitching details made them look real. Can’t wait to see next month’s post.
Capi
Thanks Capi, I like to experiment and I just keep trying different things until I come up with things/techniques that work for me. It’s fun and eventually you get results 😜
Great leave sand lichen Ruth. I will have to try it one day. I bet I can get Jan interested in trying too. how big are your teabags? Mine would only make small leaves. You ( and the rest of us) need to put a ruler in a couple of shots to give us some idea of size.
Thanks Ann, the tea bags are doubled over. I open them out and they are around 5 x 7″ maybe? Yes, a ruler in the photos would be helpful.
That is a huge teabag.
I measured, they’re closer to 4″ x 6″.
Great use of the fringing Ruth! Also loving the lichen and leaves, both look very natural.
I bought myself a resporator for “burning” projects but it was so uncomfortable to wear I gave it away after a few uses! Why hadn’t I thought of using the cooker extractor? Next time!
Thanks Karen, I tried a respirator too and it was awful. Took me a while to figure out to use the stove vent but it works great 😃