Browsed by
Tag: Kanata gameing and felting convention

A Mer-person at Kanatacon gaming and felting convention; Saturday

A Mer-person at Kanatacon gaming and felting convention; Saturday

Comments 5 comments

Surprise, it’s the continuing adventures of a Mer-person’s (and Jan’s) busy weekend. Last post, we made it through Friday at the Kanatacon. Let’s see what happens next. (I am sure you can already guess!)

Saturday Morning:

Glenn, the Mer and I hopped in the car early so we could line up for the sale. Unfortunately, by the time we reached Kanata, it was raining, so they kindly let us line up inside.  We were number 26 and 27 (the mer waited upstairs with the felting stuff since he wasn’t shopping). The instructions were that you could select up to 5 games, then go buy them. If you wanted to buy more, you went to the back of the line and went through again.

3 photos of games piled high on long rows of tables filling the room and people strarting to shop through them5.1) The first time through, a lot of games are already gone! I hope I can find the alpaca and lama games!! How many gamers in front of me are Fibre People?

Success!!! I have scored the Fibrr barring animals!!! I also found 2 card games with birds for one of my sisters in law ( they were sent to her, but I have not heard if she likes them yet).

boxes of games, lama alpaca cute monsters and cats on covers5.2) First round of shopping, I got both the lama and the Alpaca games!!! Plus 2 that had tempting descriptions, and the boxes looked interesting.

tables mostly full of gamers playing various games5.3) A quick look around, and there are still shoppers downstairs.

I took the elevator back upstairs, dropped off the games with Glenn and took a quick look around the convention before getting back to work. One of the tables near me was playing a board game about Rome. It is a visually stunning game with detailed buildings, cards with drawings, a colourful board and many tokens. It all fits in a very, very, big box.

4 photos of the game about rome with small buildings and monuments in close up5.4)A game about Rome, lots of buildings and monuments

This is where we are with this young Mer-person. We are now at the part I have most trepidations about, creating the bumps running down the fish’s back and sides. (Scutes -back and Denticles -sides)

Mer-boyfreind back facing towrds us, lying on reference photos of stergons6.1 )Saturday Morning, after the first round of game shopping.

After reviewing my reference photos, I decided on the lighter (“White”) sturgeon. With further inspection, I could see that the first few(4ish)points along the back were spaced a bit closer together, and the rest were farther apart. The number varied from 11-14 Dorsal scutes; I went with 12. To get the spacing, I used sewing pins.

2 photos showing pins used to space out the Scutes along the back6.2)pins used for spacing

I kept adjusting until the spacing seemed correct. Next was to add small amounts of wool to create the point of the Scute and to felt down the space on either side of the point. For the second one, I realised it worked better if I lowered the space between the points first and then made the point. It is more of a half cone on each side of the ridge. The body colour also accentuates the cone-like shape.

felting the first scute (bump) pins mark spots for more scutes6.3)working on the first cone link-shaped bump

A second shopping with dropped prices was announced, so back downstairs I went (ok, I did not do the stairs). I mostly wanted to see how much had gone and what was left. I was not very quick getting to the basement, the elevator needs a key, and it took a bit longer than the stairs. This meant I was at the end of the line in the hallway, which left me standing by the cashing out table at the back of the sales room!  So I got shots of the remains of the game piles and the fervour of reduced price shopping! It was actually calmer than some of the fibre festival shopping I have seen (Black Lambs’ bag of cashmere and silk mill ends comes to mind)

2 photos and insert of games piled on tables with people shopping 6.4) At 11 am, the second go through with reduced prices on most of the games started.

boxed games Gillotene, Patchwork, Code, Cards agenst humanity (family edition)6.5) I found a few more games that looked interesting, but most had no fibre theme.

The table beside where I was working had a game going; these were a pair of steampunk airships battling each other.  (The map and miniatures were very cool; the math to figure out if their various cannons and guns hit each other eluded me, but they seemed to be having lots of fun even with the math.) They spent over an hour chasing each other around the board, trying to blow each other’s airships up.

2 airships heading towords the other players 2 air ships. they are moving above a hex map of landscape and a bit of water.6.6) Steampunk airships battle over a landscape of hexes.

Switched to a new book;  Kristen Painter’s “Embrace the Suck: First Fangs Club, Book 5” (this one has some mobster-like vampires, and other supernatural naturals). Now time to get back to work.  I continued blocking in the general shape of each scute.

2 shots of the smaller superior scutes6.7)the smaller closer closer-spaced scutes

have all the scutes blocked in.6.8) Scutes are blocked in

With the scutes blocked in, it was time to turn and work on his upper human body. I need to firm up his arms. I brought the reference diagrams I was using for a minotaur project I was working on.

Mer with feling needle in his chest, sitting on little table, in back ground gameing contiues.7.1) Turning to the human parts, let’s firm up and define muscles 

Firming forearms is not as exciting as it sounds, so I took a break and I tried a bit of the skin tone on his head and some of the fish colour on the fins. I think the skin tone is close the fin colour will need more work.

Mer on table arms are firmer but still need more work.7.2) building up the definition of muscles and firming up the wool in the forearm 

I got a bit distracted listening to the new audio book and concentrating on the arm myology, so there are not a lot of progress shots.

I had a few of the gamers come over to see what I was working on this time. I did a few explanations of needle felting as I worked.

This is always a fun spot to felt and watch the gamers have fun. I should go with Glenn on their regular gaming night occasionally, too. (I might even try a game?)

I know that sometimes I am not a particularly fast felter, I am not in a rush, and I enjoy the process, and I felt quite firmly. So it may not look like I have accomplished much for two days of felting. Good thing the young Mer-person seems quite pleased!

Husband holding Mer-person, both looking happy.7.3) Glenn and the Mer in progress, both looked quite pleased with the weekend so far! (and it’s only Saturday!)

Dare I tell you what happened Sunday? How about we save that for later?

Do you have any sheep-related games in your collection?  Have you tried the Alpaca or Lama games?  Have fun and keep felting

A Mer-person at Kanatacon gaming and felting convention; Friday

A Mer-person at Kanatacon gaming and felting convention; Friday

Comments 6 comments

What a busy seven days! No wonder I feel like falling over and having a nap on the floor (which is lying and saying it’s very comfy and I should fall for it!) Chunks of the last seven days were even fiber related!!! I will not overload you with all 7 days at once,  or even all 7 of them! But let’s start on Friday, Oct. 17, which was the day my last post went up, about squishy-fish-centres.

The Fish-person in question from the last blog (AKA The Mer-Boyfriend), and I, along with a green folding tote of fibre and needle felting tools, and a cloth bag of snacks and more fibre. We all got in the car and headed off to Kanata (Glenn will be joining us after work), to go to the Kanata Games Club’s annual 2-day fall convention. This is a popular convention and is at the church they have their regular gaming evening the rest of the year. This also explains why the convention starts on Friday, since someone else already has the church booked for Sunday activities.

By the time we got there, Gaming had already begun. From previous years, I knew that the few empty tables would soon be full of gamers. Good thing I brought my own chair (walker), and I had my little folding table still in the car from demoing earlier this summer. I had the same spot at the back of the hall by the coat racks as last year. I can watch the fun, but am out from underfoot and not too far from the bathroom!

picture of friday morning bordgameing, logo for kanata gameing convention, photo showing part of mettle table, and felting suplys with mer-man in progress1.1) little table and felting supplies for the next 2 days

signs saying which games were going to be play tested and demoed. second picture of seting up a new game1.2)  The temporarily empty 2 tables directly in front of me will be filled with Playtesting and new game demos’

I got myself sorted out, got my audio book playing (Wen Spencer’s “Black Tie and Tails: Black Wolves of Boston, Book 2” (mostly werewolves) I was almost finished that so soon continued with Dianne Freeman’s “A Daughter’s Guide to Mothers and Murder: A Countess of Harleigh Mystery, Book 8” (nothing supernatural in this one).

mer person, 2 braids of fiber simmiler to the photo reference of a white strugon.2.1) I consulted with the young Mer about his fishy-part’s colours. It’s a bit early to start adding the top layer, but I am putting off deciding how to approach the Scutes and Denticles.

I have had fun with variegated braids for landscapes, since you can pull out a bit of whichever tone you want. If you don’t like blending to get the colour you are looking for, this may be an option (but blending is not difficult and fun to do too).

one of the braids unbraded to show the colours sitting beside refrence photo2.2) Part of the braid undone so you can see the colour variations.

Since I can’t work on the final colours if I don’t have the under layers to the correct shape, I need to put away the fish colour and work on adding the fins.

mer-person on foam nealing pad, with punch tool and photo reference. showing v notch in dorsal fin starting2.3) Adding the Dorsal fin, it has a “V” notch on the back part of the fin and is thicker at the leading edge.

wrapped wier and adding fiber over wrapped tail wiers. mer person's tail is on foam mat curved bladed sissors, punch tool and fiber sitting on top of it. reference pictures are sitting adjacent.2.4) starting the Heterocercal and Caudal tail fin

showing the building up of the fiber along the upper front endge of the tail fin. ref. photo is shown to comparie to tail2.5) There is a thicker area along the top edge of the heteroceral tail fin

As I was working, the convention continued around us. There was lots of cheering as well as quieter playing.  I am not sure which game this was; it caught my attention due to all the various game pieces.

hand moving game pices on game bord.2.6) I am not sure which game this was, but all the odd playing pieces caught my attention.

close up of fins in progress a bit more progresson fins this photo shows full mer-person2.7-2.8) the tail, Pelvic, and Anal fins have been blocked in, but the shape is not correct yet.

If you were curious as to how I am making fins.

To give each fin structure and poseability, I used floral wire.  To give it extra support, I added a couple of supports for the dorsal fin and a lower wire for the caudal section of the tail fin.

There are two choices: the wire can be part of the armature, or added as a supplemental element (not attached). I used both methods this time. The Pectoral fins were added to the armature when I reached the hips as I wrapped the first layer of core wool. I twisted the wire around the central aluminium wire armature, then out to the sides. I then kept wrapping wool below the wire along the fish body. The two parts of the tail are also directly attached to the main armature.

pictures showing the floral wire attached to the main armature3.1) fins that are part of the main armature, Pectoral and Heterocercal tail and caudal fin

 

The second option is to insert the appendage without attaching it to an armature. This is often done with individual bird legs if you are not making a full armature. For the birds, you can insert the straight wire and use a drop of glue to help secure it until you build up the fibre to support the wire. You can also insert a wire with a curve or loop to make it harder to pull out after more fibre is added around it. I used a single wire for the anal fin that went through the core wool, then the wire was twisted back upon itself.

A single wire can be used to create a single fin, as I did with the Dorsal fin, which went through the fibre in 2 spots, leaving a loop in the centre and one longer and one shorter wire on either side of the centre loop. I again estimated the length for the three sections of wire and twisted them.  When you are (prototyping), ok, guessing the lengths you will need after the rest of the core wool has been added. You can come up a bit short. I suspect the anathetic was hanging out in the measuring and estimating section of my brain. You may notice the change in plan as we get further into the project.

photo and exlanitory diagram showing the pathway of the wire in the core wool. more fiber will be added after wier is inserted.3.2) single wire insertion to create a secure Dorsal fin. (More fibre will be added to the core wool after the wire has been added.)

I this case, for the pelvic fins (there are two fins, one on either side of the abdomen), I ran the wire through the core wool at the level I wanted the fins to start, estimated the length, making a bend in the wire, then twisted it (this will both strengthen and shorten the wire). Then built up the core wool fibre of the fish body to further secure the wire.

Pelvic fin wires inserted through wrapped wool. the wire is then folded back to the estimated length. shows twised Pelive fin wires.3.3- 3.4) Pelvic fins are a pair of fins on the underside of the fish before the single anal fin.

It is easier to hide the wire and attach the fibre for the fin if I first cover the supplementary support wires with wool. So, like wrapping tiny toes and other fine appendages, start with a thin, narrow piece of fibre (or roving), you can always add more, but it’s a pain when you have added too much.

I secured the fibre that I will be wrapping around the supplement wire to the body at the base of the wire. Once secure, I will wrap the length of the wire. When the fin wire is wrapped, I added a thin layer of fibre over the wrapped wire, and tacked it into the fibre that wrapped the wire. I folded the fibres over the leading edge with the wire and then used the punch tool with fine (40-42g) needles to secure it to itself and compact the fin. I expanded the fin area with more thin layers of fibre and secured them with the punch tool.  I am keeping the fins thin, since fins are thin and I will be adding more fibre when I add the surface colour. If you wanted to do even thinner fins, you may choose to build this underlayer with your finished colours. I used the final outer fibre with Mrs. Mer’s fins, which are white and relatively thin (butterfly Koi).

felted fin resting on foam mat with punch tool sitting beside3.5 ) using the fake clover punch tool to flatten the fins at his hips.

Tip: support your fin on your work surface edge and use the punch tool to flatten the felt as much as you can. Pieces of pool noodle can be helpful to support parts of your work as you needle felt an appendage. Sara has a mini version of her stabit rice and burlap pad that can be used in the same way.

Tip: We are felters, we are not spinners who shun scissors as the work of the devil, and would never cut their spinning fibre. If you get the fin to the thinness you want and the general shape, you can use scissors to correct the shape. Remember to check that the cut edge is solidly felted.

In the evening, there was an announcement that we could go downstairs to view the games that would be on sale tomorrow morning. Luckily, there is a small elevator, close to where I was working, so I could check out the sale too. After looking through the extensive piles for games with sheep themes, we did not have luck with sheep, but I did find one game focusing on alpacas and one about llamas. If I get them tomorrow, I will take them to the next long weekend social and see if we can play them.

two shots of the gient game sale with insert of alpca and lama games.4.1) previewing the room full of games for sale.

It was getting close to 10 pm, Glenn had fun with the games he had played, and I had a good day of felting and audiobooks. It was time to head home. We will have to get up early if we hope to get such exciting games with fibre bearing animals! (I promise not to leave you in suspense for long!)

PS the comment button is at the top of the page, if you would like to use it.