Since my last blog in November I’ve been very busy, though not necessarily making felt. I did, however, have a week’s exhibition with two friends in a local gallery the second week in December, and this afternoon I’ve dropped off 12 pictures for an open-call print exhibition, so that’s what I’m going to talk about today. 

Sitting in the gallery, I had time to do a little needle felting – I generally prefer wet felting but needle felting is better suited to gallery-sitting.  My friend Lynzi (yep, same name but different spelling) asked if I’d make two small brooches for her to give to her mother for Christmas. Lynzi liked some earrings I’d made previously …..

….. so asked me to make a mussel shell and a starfish brooch. I’d not needle felted a brooch before but didn’t think it would be very different from an earring so I set about it.

The trickiest thing was that she wanted them very small: she suggested between 2 & 4 cm. The smallest mussel shell earrings I’ve ever made were about 5.5cm and the star fish – which was a one-off – was considerably larger.  I didn’t think 2cm was practical, not least of all because of the size of the pin needed to attach the brooches, so we agreed on approximately 4cm. The mussel shell was relatively straightforward.  For earrings I make them curved like shells. For a brooch, I just made the back solid rather than curved and was sure to felt it very firmly so I could sew the fastening pin securely onto it. 

I had to adapt the starfish design as the centre of the starfish – which had to conceal the brooch pin – had to be a larger part of the overall design than it was for the earring.  I started off using a small star-shaped cookie-cutter to help me get an even star shape.  I concentrated on working the length of the arms and the centre of the starfish, so that when I stopped using the cookie-cutter I could work into the sides of the arms to make it less like a star and more like a starfish.

Here are the end results.

Lynzi was delighted and I’m looking forward to hearing what her Mum thought.

Now here we are in 2026 and I’ve had to put in quite a lot of studio time this week to create work for a print exhibition. Another local gallery (The Horsebridge Community Arts Centre in Whitstable) had an open-call for a print exhibition. The only requirement was that pieces had to have some element of hand printing. I wondered if my felt pictures with a printed tree would meet the criteria so had a chat with the organiser.  She said ‘yes’ so I decided to enter some.  The deal is that you pay per piece for a framed, wall hung item and you can put up to 5 unframed items per wall piece into a browser.  The gallery takes 10% commission on sales of the framed pieces (which you’ve also paid to submit) and 35% commission on the unframed, browser pieces (which you haven’t paid to submit). I opted for 2 framed and 10 for the browser.

These were the framed pictures I already had

And two unframed pictures presented with a card back and mount. 

So, I just needed to make 8 more unframed pictures this week to fill my quota for the wall and browser.  That didn’t seem too unreasonable when I decided to do it, but it has felt a bit less sensible given the time I’ve had available. It’s also quite cold here (for England). My studio is in an old industrial building (it used to be a bottle capping factory for Shepherd Neame, the oldest brewery in the UK). It has very little heating, so I had to decamp to my house part way through the week when my hands just could not cope with any more freezing water.

The unframed pictures have a mount with an aperture of 20 x 20 cm (about 8 x 8 inches) so the felt is about 24 cm square.  I thought the best idea was to make 4 pictures in one sheet and cut them apart during the fulling process. By ‘best’ I mean most efficient while still being a size I could handle on my felting table. I drew myself a little sketch to help me decide where to put the silk

Option 1 would mean the nuno felted area was the same in all 4 pictures so it was an easy decision to go for option 2.

I spent quite a long time sifting through my embarrassingly large collection of second hand silk scarves to select the pieces I wanted to use. 

I was keen on a grey leopard print scarf with a white background but it had stripes of more and less dense silk running across it. I thought I should just check that the dense section would felt OK so I did a very scrappy little sample. If you’re wondering why I got so little shrinkage, the felted scrap started off considerably bigger than the non-felted one.

It’s not easy to see here – more visible on the finished picture – but the more dense stripes produced a little more ruching.

It all seemed to felt fine so above you can see the first batch part way through the fulling stage.

Below is the layout for the second batch of pictures

I put a stripe of second hand wool (usually tapestry wool) along the top of the silk section. For the brightly coloured marbled scarf I auditioned a few different colours (red, yellow, dark brown, green)

And went with the green

So, here is the first group of 4 pictures with their printed trees

And here’s the second group of 4

I took the photos very hastily today and not in very good light: they are not as grey as some of the images suggest.

I’ve presented them with a back board and white mount and dropped them off at the gallery this afternoon. The deadline for submissions is tomorrow so, that’s pretty good for me. I have marked ‘last minute’ tendencies.

I print the images with a heat press – the kind of thing you might use for printing and image on a t-shirt. As I was heating it up anyway, I pulled together some pieces of felt that were test pieces or offcuts, cut them into small pieces and printed on those too. I will make these into cards.

Well, that’s me for now. Wishing everyone a joyful, healthy and creative 2026.