A little more stitching
Continuing on from stitch camp I have started stitching. I like the pieces with a lot of negative space best but thought I should try to do something outside my natural inclination. So I picked one with mostly yellow but a nice distribution of blue too to start with.
I did a bit of stitching but decided it was too soft and floppy to work well. The stitching was distorting the fabric even though it wasn’t pulled too tight. Another thing I could see, that might happen, is the messy stitching on the backside might show through the white fabric. Iron-on interfacing would solve both problems. I know I have some……somewhere. And the Iron, I have one of those too, I am sure I saw it recently.
I found the iron first, but not before a mouse had found it. The mouse (the one we caught in the fall,) had chewed up the cord. Not a nice chew in half or in one spot but all the way along. You can tell how often Iron because the mouse was caught in the fall, late September or early October. Well, I didn’t like that iron anyway it tended to leak. I will have to buy a new one. Sorry, no picture of the chewed-up cord. I tossed it out on garbage day.
I never know what to buy, so I picked the middle price and the one that says it does not leak on the box. I was tempted by the one with the retractable cord but it was digital with little buttons. I don’t think my iron needs electronics.
Then I found my one-sided iron-on interfacing.
I am less thrilled with the pieces than I was so I picked 3 of the double pieces and one of the singles to use and I will see how that goes. If I start liking them better I can do some more.
I have 2 ironing boards. on is under siege in the spare bedroom and the other one, the small one, disappeared into the packed things. so I had to do it the old-fashioned way with a wool blanket on the table. I used a small piece of sheeting for the ironing cloth.
Stitching with the interfacing is better.
When I did this bit of badly done satin stitch, I noticed the distortion starting. Adding the interfacing and ironing seems to have fixed it.
I don’t know what stitching to do. I know it’s all just an exercise but I still want it to look good. I did some seed stitch and that is probably my favourite so far. I thought it was done but looking at it now it needs something else across the join down near the bottom between the woven circle and the yellow seed stitch I think.
Since I started writing this post I started the second piece. One of the more blue ones. I decided to use some green thread as there are some green spots where the blue and yellow paint crossed.
So far so good. I find it hard to decide where to stitch and what to stitch. I am enjoying it and I hope my stitching will improve with the practice. I find it hard to get my needle to go in or come up exactly where |I want it to. I am using a rounded tip needle. Perhaps a sharp one would work better but I didn’t have one with me. Another thing to look for. It is probably stuck in a piece of foam with some felting needles in a project bag or box.
It wasn’t until I started editing the pictures that I noticed this piece has a parrot in it. It is funny how we don’t see things until we take a picture of them. Do you see it too?
