Browsed by
Tag: fabric manipulation

Playing with Fabric Scraps

Playing with Fabric Scraps

Hello again. I know its been a long time since I’ve posted and I sincerely thank everyone who has contributed to the blog in my place.  I definitely feel it has enriched our community and broadened our scope.

Because of health issues in our family, I haven’t been doing much creative work.  But managed to do a little fabric manipulation with fabric scraps.  I had bought a book a long time ago by Ann Small, Layered Cloth, The Art of Fabric Manipulation. Anyone who knows me or followed me knows I love texture.  I was intrigued.  Plus it was something I could work on a little at a time.

Like  everyone else, I collect all things fiber and found a stash of five fabric pieces I had bought at a thrift store. Perfect, but I needed one more for six layers. No problem.  I had an old Egyptian cotton sheet laying around I had used several years ago to make small pillowcases.

I wasn’t too concerned with colors, but it worked out fairly well. I cut five inch squares out of each cloth. They are different weights of cotton and or blends.

My first sandwich. Excuse the shadows the light wasn’t very good.

 

 

 

 

 

 

 

The book gives many examples of patterns.  I was really excited to experiment. I started in the middle and using the width of the presser foot to make the next row.

I assembled a variety of tools, not knowing which would work best going through five layers.

 

 

 

 

 

 

 

The blue scissors proved to be most useful on most of them. Although my hands were not happy with me.

If you look closely at the pic above on the right, you’ll notice how stringy the one corner is.  This is because it was cut on the grain.

For the next five sandwiches I alternated fabrics and designs.

After stitching and cutting, I roughed up the samples to get them to open up.

 

 

 

 

 

 

After being washed and dried.

 

 

 

 

 

 

 

The circular design was difficult to cut through the layers.  I had to use the seam ripper to open it up far enough to get the scissors in and hope I’d get through the first five layers and not cut all six. The finished piece is very thready even after washing twice, dried in the dryer.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

On the following one I decided to slash squares. So I used a piece of  stitch and tear  to draw my pattern then stitched it to the sandwich and followed the square pattern. Again I had to use the seam ripper to get started.

 

 

 

 

 

 

 

After stitching, slashing, washing twice and drying, here is the result. I found it interesting that not all squares opened, but every other row did creating it’s own pattern.

Here are all six of them together after they were washed, dried and trimmed.

I have to say the pink is my least favorite, but it was a fun project to see how different each pattern turned out.  I’m sure using different fabrics and perhaps even using a tie dye type fabric you can get some really fun outcomes. Have you ever tried this?

I’m not sure what I’ll do with them now.  Any suggestions?

2016 Third Quarter Challenge

2016 Third Quarter Challenge

Well, it may be hard to beat the first two quarter challenges.  But it will also be possible to combine those two processes to help create this one.  Adding dimension to our projects.  This is something I’ve been working on since I began learning to create texture in flat pieces.

I became totally intrigued with this in the first challenge I participated in which was mixed media using clay, curing clay, felt, fabric, metal and paint.

https://i0.wp.com/feltingandfiberstudio.com/wp-content/uploads/2013/09/mnelsonchallengeoverview.jpg?resize=499%2C432&ssl=1

More about it here:  https://feltingandfiberstudio.com/2013/09/30/third-quarter-challenge-marilyns-entry/

I was hooked.  The challenge became to create dimension in felt alone.

Its what I like to call it having the picture jump off the page.  Being able to touch and interact with the story.  And there are many ways to do it.  Using resists, carving, fiber sculpting and forming, cracked mud:

2014-10-29 11.4720151007_161152

SDO 4 spikes flower sdo 5 anemones

 

 

 

 

 

 

Marilyn's Carvings
Marilyn’s Carvings
Marilyn's Tiles
Marilyn’s Tiles
Stewart Stephenson - Marilyn
Stewart Stephenson – Marilyn

 

 

 

 

 

 

 

 

 

Building up with needle felting:20151014_152228

Needle felting and wet felting:

20160421_140923a

20151020_135607 20151024_160640

 

Adding dimension thru layering and fabric manipulation:

20160523_142107

Inclusions:

2014-04-30 12.00.28

 

Combining techniques:

2014-05-24 16.18

It doesn’t mean having to make a 3D object, but you can also add dimension to one.

closeup front

A  recent example for the resist challenge came from Ann.  Plenty of dimension here.

ann vessel

Or Teri Berry’s flame hat with foil. Teri I can’t imagine how you’ll top your recent work, but I hope you’ll try.

teri flame hat with foil

Of course, there are many more examples we’ve seen here on the Studio and the forum. While many of you do this routinely, please challenge yourself to take it to the next level!  And if it’s the first time, take baby steps.  I look forward to seeing how you create dimension.

%d bloggers like this: