Browsed by
Category: Community

Mixed Media Surface Decoration

Mixed Media Surface Decoration

With the latest quarterly challenge being Surface Design, and “mixed media” in particular, I thought I would share a couple of the things I’ve made recently that might fit into this category.  The first is these wet felted Merino pendants with acrylic paper inclusions and hand embroidery.

BDA7B640-E134-408E-8513-C4A488C33F08
Acrylic papers in assorted colours and textures

I came across a stack of the papers while having a sort out in my studio. They had been sitting in a drawer for several years, being saved “just in case” they might come in useful! They are in a range of beautiful colours and have wonderful textures but my mind was in “use it or lose it” mode…….there was no way they were being thrown out so the pendants came into being.

751819F0-3D78-4A8F-A7F1-648B90586033
Wet Felted Merino Pendants

The second project was an experiment to see how acrylic and Inktense paints would work as a colouring medium for white Merino. I had seen an “elf” style hat and fancied having a go at making one so this became the base for my paint experiment.

Having seen on here that Ruth has a lot of success printing with acrylic on felt, and knowing that Acrylic and Inktense paints are both non toxic and colourfast when dry, (to be colourfast Inktense must be mixed with water, not used in dry form) they both seemed like a reasonable option for colouring a hat.

I started by applying Inktense to the dangly bits at the sides and all was looking good until I noticed I was loosing a lot of colour as the paint started to drip off the end of the wool and puddle on the worktop…..too much water in the mix! I blotted the dangles to remove a lot of the moisture and applied paint again but this time a lot more concentrated. It still ran a little but the wool retained more of the colour and it didn’t stiffen at all. I’m sure if I had applied that concentration of acrylic it would have been very stiff!

BCDA6FA3-0AF0-44F2-A62B-EA746B006BDE

Next I tackled the main body of the hat. For this I used watered down acrylic, my logic being that the more water I used the less likely it would be to make the wool stiff.  I wanted to avoid saturating the hat and having another puddle so I lightly brushed the acrylic over the wool, some of the fibres not being touched by the brush. Once the acrylic had dried I overpainted with Inktense and I really liked the mottled effect this combination created. Lastly I used thick acrylic around the base of the “tail” as I figured this is the one area that would benefit from being stiffened. After leaving it to dry for a couple of days I hand washed the hat to check it was colour fast and was relieved to find that non of the colour washed out.

16EC5F04-4616-478E-A516-35675B065BED
Acrylic and Inktense paints used to colour white Merino

To finish off I added a stem with leaves (coloured Merino – not painted) and some colonial knots at the base of the tail. I’m really pleased with the result so will definitely be applying paint to fibre again at some point. Have you tried painting your felt?

C91960DF-4432-4308-BA2F-BC505D1A96E6

 

Jan’s 3rd Quarter 2017 Challenge Part 3

Jan’s 3rd Quarter 2017 Challenge Part 3

Now the final installment of Jan’s 3rd quarter challenge.

Part 3 finishing

I had been working on pieces of the waves while waiting for my mom at various doctor appointments. So I was able to try out the parasol to see if the concept would work. I was pleased but most of the crowd looked confused.

The demo display of felting included Miaka’s Cat Cave Coelacanth fish and the sheep head I had made at a workshop with Wendo (a local felter who felts very quickly) everyone seemed very interested in the little balls of wool top. I think it was the bright colours.

I continued refining the colour on the octopus and adding more sections of wave pieces at the weekly Monday social at the guild. I also showed off the progress at Show and tell during the guild meeting.

It was getting close to Christmas and I knew I would have 2 days to finish the polar bear I was also working on and come to a decision about the boats and fishermen. I did decide to add the fishing boats but let the octopus play with…Er, “rescuing” them. I made the 3 long skinny canoe like boats underneath there is a keel and you may be able to see the upturned prow. Other than shape and general colour I did not do as much detail with them. I was pleased overall with the final look.

So let’s review the original inspiration and what has happened to it!

Into the box to be wrapped as my nieces Christmas present. She is good at swimming and likes the water so I hoped she might enjoy the octopus.


I hope you have enjoyed reading about how I finally got the 3rd quarter challenge finished if just a bit late. But I hope it was worth the wait. I do have a polar bear that I could show you if you are not too overwhelmed with pictures! Maybe I should save that in case Ann ever asked me to write you a note again!
All for now, Jan.

I hope you all enjoyed Jan’s story. I will share her other posts later in the winter.

Jan’s 3rd Quarter 2017 Challenge Part 2

Jan’s 3rd Quarter 2017 Challenge Part 2

Part 2 of Jan’s post: 

Part 2 create the base and start the octopus


Layout the background.
I had a bag of mystery white wool and some super wash merino, combining them together, I started my base layer. Then I lay in a line for the sky line and spent hours playing Runescape (AFK stuff like fishing and harassing trees) on the computer while hand blending the golden tan colour for the sky. I worked over the big 3 inch thick foam square I got at Walmart for the 12 x 12 pieces I did earlier in the summer. It again worked great with my wicked multi-needle metal tool to make a quick base from which to start.
     10 Needle Felting Tool – Aluminum

I had to put this project aside to work on the guild library, restructuring the Dewey Decimal Classification project, but was able to return to the Felting Challenge in September as my demo project at the carp fair.

There was a lot of interest in felting and lots of requests for Felting workshops this year. I directed them to the guild website and told them there would be more workshops for 2018 on felting so check the new schedule when it was up in November.

Carp Fair demo – the octopod is created…..sort of.
Carp Fair is an old fashion rural fair on a big scale. The Ottawa Valley Weavers and Spinners guild is in the Antique section. Usually we freeze since it’s the last weekend in September. We have spent many years demoing weaving, spinning and felting there, cursing the cold weather. (I can spin without feeling my fingers but not for too long or too well.) Well this year our pleas were answered. We had the hottest weekend of the summer, we were fine as long as we stayed in the shade of the tent and didn’t stand up! SO I got a lot of felting done.

Using my photo reference I chose the general shape and pose I wanted for the octopus to have. I had brought a package of pipe cleaners from the dollar store and had decided that 2 twisted together would make a good leg support armature and allow me to bend the tentacles as I wanted later.

Math is not my best skill it’s right down there with spelling actually but I can count to 8 twice. So I laid out 8 pairs of pipe cleaners beside me on the table, twisting them together as I put them down. (Are you having awful premonitions yet?) I pulled out my Rideau Arcott core wool and started shaping the slope back for the head, and adding the first leg. Then wrapped it with wool.

Friday is when all the kids come to the fair to do “research” for a questionnaire they have to fill out and to do the games and rides. They usually wander through the antique section in waves, it wasn’t too busy this year. We also had a canon being fired and a tractor parade in our area. So it was a bit busy in the early morning and later in the afternoon, it was quieter at the hottest part of the day.

Got to the last leg and started to build up the tentacles with more core wool to get the more triangular shape. By the end of the day I had what was obvious some kind of octopus like creature.

Saturday morning;
Once I had the general shape to my liking I started with the super wash to lay in the colour. I have discovered that super wash has exquisite colours and take forever to felt…. I will not be lured in by the evils of super wash again! It will felt with needle felting but it is a lot of extra work and it makes felting a lot slower! I will likely just save the super wash and blend it with corriedale or merino that still has all its scales.

One of the woman who was working at one of the other displays in the antique section came over and asked “does your octopus have 7 legs?” No I’m sure I put out 8 sets of pipe cleaners to start with. Oh no, one is missing, too late.


Sunday Carp fair;

The Octopus has its base colour layer, and one-sided blow-hole. I used a few fine skewers to rap the wool then Felted it quite firmly pulling out skewers as it shrunk. Thus making a hollow blow tube which I added to the skin fold just behind his/her eye.

You will have to wait for the next post to see how he/she turns out.

Jan’s 3rd Quarter 2017 Challenge Part 1

Jan’s 3rd Quarter 2017 Challenge Part 1

My friend Jan really got into the 3rd quarter challenge. She worked on it most of the summer and fall. If you have read other posts by Jan you know she is a great story teller. So, I had to break this into 3 posts. This post and the next 2 will take you on a journey with Jan from concept to finished challenge.

3rd quarter challenge part 1 the Plan

I was instantly intrigued by the third quarter challenge. I have always appreciated the aesthetic of Japanese prints and the Hokkaido wave had been particularly interesting to me. A bit strange when you consider I really don’t like getting wet. Ok, I am a bit hydrophobic. When I look at the Wave I don’t concentrate on the impending death of the fishermen in there precariously tipped boats, the fact that mount Fuji may be plunged into unpleasant wetness at any moment but that the repetitiveness of the design on the inside of the wave reminds me of a Japanese umbrella. Umbrellas are good. They keep you from wetness. A giant umbrella in the middle of the ocean sounds almost appealing, as if you might stay dry surrounded by all the wetness.

OK, I have a theme. Now who would need an umbrella in the middle of the ocean? Hmmm. An octopus!

The Great Wave off Kanagawa also known as The Great Wave or simply The Wave, is a woodblock print by the Japanese ukiyo-e artist Hokusai. It was published sometime between 1829 and 1833 in the late Edo period as the first print in Hokusai’s series Thirty-six Views of Mount Fuji. It is Hokusai’s most famous work.

As you may have noticed I tend to do flat pictures with a bit more thickness than flat pictures usually have. So the concept of taking a print you like and using it to inspire something from it but not make a copy will not be a problem. OK wave as umbrella, and octopus holding umbrella. Other elements of the print to work into the finished pieces. The sky, the other littler waves and maybe the boats with fishermen, or maybe not the boats with fishermen. I have nothing against fishermen, I really do like to fish. But I’m not to fond of boats. They are just tempting fate. Why leave nice solid ground if you don’t have to? So let us leave the boats for a later consideration.

I had a plan and all within half an hour of reading the email. A quick sketch (I thought I had lost it but found it inside my new needle felting box. This is why the original idea and the preliminary execution differs quickly. I lost the sketch by putting it somewhere safe.)

Then a trip to the wonderful internet to “acquire” reference photos and do a bit of research.

I’ve got the wave (I found 3 graphics of the wave one with the fishermen very easily visible) so let’s get umbrellas.

Now for some octopuses/octopi.

Phase 1 Planning is complete.

Felted Leaves

Felted Leaves

SONY DSC

Hi Everyone,

My name is Karen, and I run Big Sky Fiber Arts, an online store specializing in wool, effect fibers, and threads for felters and other fiber artists. I love adding three dimensional elements to my own work, and I’ve had a sneaking suspicion that dissoluble fabric might open some new artistic doors.  This past week, I decided to experiment by making some needle felted leaves on dissoluble fabric.  Making the leaves is very simple, and it is a good project for all levels.

To make the leaves, I photocopied dried leaves I collected this fall.  I traced an outline on the picture of the leaf.

IMG_0620

I placed my tracing under Sulky dissoluble fabric, and I traced the pattern. I began filling it in with wool.  To make these leaves, I experimented with different wool.  Mostly I used carded Maori  (Corriedale and Coopsworth) in yolk, orange, red, and soft fruits as the fibers are short and easy to control.  I added some additional color with bulky carded Corriedale in various shades (peach melba, whirlpool, and sour cherry). I also experimented with merino.  The Maori leaves came out a bit firmer, and they filled in more quickly than the merino leaves.

IMG_0549 - Copy

I added in veins.  Where the veins seemed too prominent, I added thin wisps of wool to cover the veins. I like to use all tools when needle felting. Single needles help you to add detail (such as the veins). I like to use the needle holder with five needs when covering a lot of territory.  I use the three needle tool the most as it gives a lot of control.

leaf on fabric 2

 

I cut around the leaf to remove the dissoluble fabric.  I put it in a bowl with warm water for about three minutes, swirling it around a bit.

leaf in water - Copy

When the fabric was gone, I placed it flat on a towel. Rather than wringing it out, I pressed it dry with a paper towel. I then propped the leaves on, yes, measuring cups.  As the leaf dries, you can give it a little shape by positioning it as you like.

drying leaf - Copy

In the future, I might consider doing some free motion stitching on the leaf once it is dry.  You could use a mixture of half glue/half water to stiffen the leaf.  You would paint it onto the leaf, and then form it. Here is close-up of a different leaf.

leaf

I decided to put the leaves on fabric, and I wanted to couch threads and yarns around the leaves.  I choose a stiff fusible stabilizer (Pellon 71). I covered it with a batik, and then I covered the batik with a hand dyed silk fabric. I used a spray adhesive to hold the silk to the fabric.  I couched sari yarn and hand dyed threads onto the fabric. I added a layer of batting and backing fabric. I used a few of my machine’s fun stitches to add texture, and I also quilted in some regular lines.  I then sewed the leaves onto the fabric with a row of stitches down the center vein.  I may still add more stitching and beads. If you want to learn more about this method of stitching and couching threads, check out the wonderful work of Carol Ann Waugh (http://www.carolannwaugh.com/).

SONY DSC

 

I can think of other leaves that might be fun to try with this method, or perhaps some flower petals.

Are there ways you could use dissoluble fabric and needle felting?

Feel free to get in touch with me if you have questions!

Karen@BigSkyFiberArts.Com

Big Sky Fiber Arts

BigSkyFiberArts.com

Finishing and Framing

Finishing and Framing

 Our Guest Artist today is Tracey Thompson who has several galleries interested in her work and offered to share some tips on finishing and framing with us.

So, you have created your latest pictorial masterpiece and now you have to decide how you wish to display it.  Here are a few options that I have tried, I am sure there are more.

Canvas

Deep or shallow edge canvases are very useful and can be used in a number of ways.  One suggestion is to make the piece big enough to stretch right over the sides and onto the back, then staple gun the edges of the felt to the wooden structure. Here is my 8×8 canvas example.

Then to tidy up the back I cut a piece of calico to size, ironed a neat hem and sewed it carefully to the back covering all the ugly staples, then added a D ring for hanging.

Another way to use canvas for displaying your work is simply to stick strips of double sided sticky tape onto the canvas and press your work onto the tape, this is useful if you want an organic look rather than a straight edge.

The last canvas tip I have is to again use tape to stick your piece to the canvas but this time, the work is slightly bigger than the canvas, so this creates the illusion that your art is ‘floating’ just off the wall.

 

Framing

Obviously your pieces can be framed, including a mount and glass. This is how I finish my pieces, choosing the correct colour mount to compliment the work, and using white wooden frames.

Another way of framing is to tape the piece to a complimentary coloured mount board and display it organically within the frame.

The last method I want to show you is a backing for a wall hanging.  Once the piece is finished, size a piece of calico for the back similar to the canvas above, and sew as before.  Then machine sew a strip of velcro (the fuzzy part) to the top of the work. Cut a slim baton and to this the loop section of the velcro is glued, and a D ring screwed midway for hanging.

The piece now has options available to yourself or the customer.  It can be hung as it is, using the D ring, or the baton can be taken off and the piece can be framed organically or with a mount as desired.

I hope that has given you a few ideas as to how you can show your work to its best advantage.

Thanks Tracey for these great framing tips!

 

 

 

 

 

 

 

 

 

 

Die Cutting Felt

Die Cutting Felt

Today I’m pleased to welcome Tracey Thompson as our Guest Artist. Tracey has been an active member on the forum and will be showing us her Die Cutting Machine and her experience cutting felt.

A recent post in the Felt and Fibre Forum led me to comment that I had tried to cut felt using a die cutting machine.  It was given to me free by a friend because she wanted to treat herself to the next model that had more bells and whistles!

Here is the die cutter, it is a Spellbinders Grand Calibur.  It cuts beautiful images in  card stock but how would it cope with felt?

I tried both commercial felt and my own prefelt in this machine.  The results were mixed with both felts, but I think this was largely down to the dies.  The more intricate the die, the more it mashed away at the felt, sometimes obliterating it!

I then remembered that I had a quite simple die in the shape of a snowflake, and as I still have Christmas cards to make, I thought I would have another go.  This next picture is my prefelt with the snowflake die and a Merry Christmas die.  The hole in the middle of the prefelt was where the snowflake came out perfectly, and the mashed up bit at the bottom was where Merry Christmas didn’t!

So I thought I would make a simple card to use the snowflakes on.  I put down two layers of Tanzanite from World of Wool, as I wanted a night time feel as a background.

I also wanted simple decoration, so I just lay a few blue and white mulberry silks on the top.

Here it is after felting.

I then ironed a piece of interfacing onto the back to make the stitching more stable. I had cut out a few snowflakes using a white commercial felt, and I used a double silver metallic thread to attach them to the felted piece.

So here is the finished card, it is a fairly simple one but it’s one to tick off the list!

Tracey, thanks for sharing your experience with us and for helping to fill in on my leave!

A Felt Christmas Card

A Felt Christmas Card

I sent a card to my partner for the Christmas card on the forum. holiday-exchange-2017   She has it now so I can tell you all about making it.

First I went through my old felt bin to find a thickish piece of felt and cut out a tree shape. It’s a blueish green even if it doesn’t look like it.

I then cut out some red prefelt I had for the background. I did 2 layers for each of these. I did the extra on so if this didn’t turn out I could go with plan B. 

Then I roughly cut out a tree shape form a silk scarf I got at the second hand store. I then layers the pieces and wet it all and trimmed the silk a little.       

Even with 2 layers the prefelt is not very thick so I added red merino to cover the extra silk and make it thicker and more sturdy. I cut the wool to give it a nice straight edge to put up against the tree and give a nice clean line.

After that was done I flipped it over and wrapped the excess around to the back. I wanted to make sure the tree would stick to the finished felt  so I did some poking with my felting needles.

This after the fulling.  I blocked them to square them up. The blue colour of the tree came through the silk more than I wanted so I gave it a shave to bring the green back.

I went through my stash looking for some fuzzy gold yarn to use as tinsel but instead found this yarn with beads that I think looks like lights. I sewed it on and then added some shiny pony beads as Christmas balls and a star.

I thought it looked ok but lacking something.  So I added some 3D sheep. I think they improve it and make it look finished.  

I printed off a post card template from the internet and using fusible web ironed it to the back of the felt. I forgot to take a picture of that but I am sure you all know what the back of a postcard looks like. I like it and my exchange partner seemed to be very happy with it. No I just wait for Canada Post to decide to get mine to me. I am hopeful it will arrive before Christmas.

Here’s  wishing you all a great holiday season,

Ann

 

Guest Post – Haddington Spinners and Weavers Retreat

Guest Post – Haddington Spinners and Weavers Retreat

This is a guest post by one of our forum members Carole aka Craftywoman. Thanks Carole for this interesting and informative post. 

The Haddington Spinners and Weavers are a group of people who meet regularly and once a year head off into the Scottish Borders to Innerwick to enjoy time together, have fun and explore new creativity.

Our guests on this weekend were the Sgioba Luaidh Inbhirchluaidh –  “Inverclyde Waulking Group”.

Waulking the tweed or the cloth is a term used to describe how women would collect together on the islands of Scotland including Skye and the Outer Hebrides to waulk the cloth after it had been woven. They would sing in Gaelic as they waulked the cloth (moved it around a table between them in a rhythmically thumping movement) to shrink it by about 6 inches and make it a firmer fabric for tweed clothing and so on.

Our weekend was greatly enhanced by these wonderful women and in their words – “In the songs you can express your every emotion; the hypnotic thumping of the cloth on the table helps to release all your tensions and frustrations (and it’s very good exercise!); in the company of your friends you can have a good gossip, and talk over problems. It’s great “female bonding”! And cheaper than counselling!” http://www.waulk.org/index.asp

The Waulking songs (in Gaelic), pictures and a video of our Waulking at Innerwick in the Scottish Borders can be seen on this link to their Facebook page. On this page you will see women in Poland and America Waulking the cloth. The technique was taught to women in America via skype – how things have moved on.

https://www.facebook.com/Sgioba-Luaidh-Inbhirchluaidh-130538446971489/?hc_ref=ARTLadcY6tDtD8HjkZBkrn6ZOb3pA_l9fu9HL4OsKwMLO5Gp1ZzJKmnFa53NrxUu0oM&pnref=story

Felted piece

A felter who sadly passed away had started this lovely piece of work. She was a felt artist,  which is apparent in many of her pieces, but unfortunately, she never finished this piece.

During our weekend away at Innerwick in the Scottish Borders we sat together and discussed her and her work, scratching our chins and wondering how as a group we could come up with a plan to complete her piece. We had pieces of felt work that some people had completed when working with her, plus our own merino tops and Shetland fleece, the fleece from one of the women’s own flock.

Over the two days we started to needle felt in a sweep of colour and natural pieces from turquoise through to purple, everyone added their own flair

After much discussion on what we should do and how allowing for the those of us who went off-piste, we produced this final piece. It looks like stained glass windows one woman from the group is going to make a beam out of driftwood with a naturally plaited loop for hanging.

Now we can take the community spirit of the Haddington Spinners and Weavers with us where ever we go be it running workshops, gorilla spinning and showing the crafts of spinning, weaving and braiding at exhibitions.

Individual pieces – one woman has taken on the onerous task of making a Shetland Taatit Rug for young couple marrying next year. The woman is Scottish and loves horses and the man is from New Zealand so a feather will represent him. Basically, she has woven the base for the marriage bed rug, and now is tatting images for both the bride and the groom as well as celtic crosses and circles, hearts and traditional designs to ward away trows (mischievous spirits) and witches. The rug is laid on the bed stitch side up.

https://www.shetland-heritage.co.uk/taatit-rugs-exhibition

Whilst the rest of us knitted, wove and spun.

More From Jan Scott

More From Jan Scott

Canvas 3: arctic Fiber Gold, Qiviut!! Now that is Canadian

Now I was on to canvas 3. I had been looking and thinking of quintessential Canadian topics, I considered moose and had selected a couple reference photos that I may do at some other time but just wasn’t quite what I wanted. Then I started thinking about the arctic. Muskox!!

My brother Dave is a Geologist, he has worked up north most of his career. He told me of being on a mapping traverse and stopping to sit on a bolder. He had been innocently enjoying his lunch when he heard a Whiffling sound behind him. So he turned to see what it was. It was a muskox squinting at him. He seemed to be trying to figure out what Dave was, likely hoping for a sexy new female muskox and not an interfering male one. He got a little closer and seemed to realized it was only a geologist having lunch, did a snort, looked indignant, turned and left. INSPERATION!! I will do a muskox. (But without Dave and the rock).

I kept to the same work process as before, Research first; off to the internet to look at lots of muskoxen, eastern arctic, western arctic and Greenland. I looked for various pictures with details I wanted. Coloring, body shape, horns, feet, nose, eyes. I spent hours having fun surfing Google images. I made of folder of the ones I thought most helpful.

When I had a good selection of reference photos in my file, I grabbed a scrap of paper (which now I can’t find to show you) and did a quick composition sketch to fit the 12×12 square format. I wanted the muskox to be emerging from the background. So I would need the head and shoulders forward and land for the muskox to stand on. Ok I will need a background to work this from. I am not fond of getting wet if I don’t have to so needle felting is my preferred method of working. I made a gray brown back ground so I can add foliage and muskox to it. I used a felting tool I purchased at the fiber festival Twist. It is perfect for background work! You can get it here https://halcyonyarn.com/felting/68862190/10-needle-felting-tool-_-aluminum

For the background I used some of the leftover fin-wool form Miaka’s great fish cat cave https://feltingandfiberstudio.com/2016/02/25/the-great-fish-creation/ and some Shetland in a gray brown. I measured out the felt so that I had enough to rap around the stretcher bars of the canvas and secure it to the frame.

Next was to build up the core of the muskox and base. I had used an armature in the frog but here I was only working with part of a muskox, so the front legs and one back one have an armature, as well as the neck, head and horns. It was very handy to be able to tilt his head up so I could work on his chin!!!

 

I continued using Rideau Arcott for my core wool. It was free, unfortunately it was also dropping veggie matter all over the floor. But it made a good solid base for the muskox and the promontory he is standing on. I added the armatures in as I built up the structure. The flexy neck was really odd in this under layer form.

Next I went to the living room and started searching for the colours I would need, I used alpaca for some of the black and reddish brown as well as merino Shetland and assorted bits I wasn’t sure what they were anymore. The pull it apart over and over again blending technique really worked well here. I used the photos to try to get a realistic colour. I started adding the colour layer from the Hooves and nose first and working up the body. I blended only a bit at a time and re-blended to create more so there is uniformity in that I am using the same base colours but the exact percentages are changing as I mix each batch. I was not blending to the point of a uniform colour so the individual colours still showed as I used them which lets the eye blend them. I also considered the light source as above and slightly behind the muskox. So you have was lightening of the colours from both sun damage and visual lighting conditions to consider as I worked up the fur.

To create the fur effect I used a combination of securing the fibers at one end and the fold over technique to get the shaggy fur look. I used a single needle and a tiny bit of black blended alpaca for mouth and eye details. It was amazing how little fiber could create so much detail.

Mounting: With the canvas removed it was easy to use double sided Carpet tape to position the piece and then sew it around the stretcher bars. I again used the indentation of the stretcher bars to give myself more height for the piece. I carefully adjusted the foot and attached it to the promontory then adjusted the head down and made final adjustment to the horns. This is the show and tell presentation at the guild. Sorry that Froggy is giving you a cheeky butt view.