I think I might have had too much time on my hands a while ago. As we say here ‘What’s seldom is wonderful!’ So I got a little curious about some things. Fibre of course had to be involved.

We don’t drink coffee in our house – my husband was never a fan and I found myself to be allergic to it after going cold turkey in China back in the 80s. I do love the coffee aroma and I can be sometimes found near one of our oldest coffee houses in Dublin, Bewleys, just sniffing the air.  At this point, I really have to post a link to their rather famous cafe in the heart of Dublin.  It’s a haunt of mine, even though I can’t drink it.  It is worth calling in to if you are on vacation (the food is amazing).  There can be queues so it is worth going early.  Besides the food, the original works of art are breath taking.  https://bewleysgraftonstreet.com/

What has this got to do with my post – absolutely nothing – but I just had to share so you have a special spot to add to your itinerary when you visit Dublin, Ireland.

But, I digress. We drink a lot of tea in the house and while I like lots of different flavours, I tend to consume mostly an Irish brand, Barrys. It, along with an Irish brand of crisps (potato chips) called Tayto are two products most requested when visiting ex-pats. We use tea bags rather than leaf tea and we compost the remainder as the bags are now biodegradable.

My first thought during this time of being busy doing nothing was, would the tea bags (without the tea) felt into merino fibre. Before I could experiment I had to empty the tea bags and wash and dry them. I have to admit this was not a favourite job. The smell of the used bags assaulted my nostrils, so I worked quickly (every cloud, silver lining and all that!). Once dry I divided the bags into two groups and I made marks on one group with what I thought was alcohol based walnut ink and let it dry. Then I went to work laying down the ‘marked’ tea bags and adding 10g of merino fibre on top (4 layers) I finished off with the unmarked tea bags, layering them so that I could see how thick it could make them before the fibre would stop permeating them.

It was a successful experiment. The bags fully felted into the fibre and the sample shrank by 45%. The marks, however disappeared, so I will add them again. It turns out the ink was acrylic – note to self: next time, read the label before buying!   

I do like the textural finish on this piece and it is good to see that something as mundane and ordinary as a used tea bag can yield a successful result.  Here’s a very quick peak at the bags and outcome:

Recently, I’ve been doing a bit of reading up on the science behind making felt. What we usually do is add soap to water, in my own case, I use olive oil soap which has a pH of 8. The paper I read maintained that wool fibre would felt once the pH value was moved from neutral. This meant that I should be able to felt a sample by adding an acid solution to the fibre. I was keen to try it to see what would happen.

First of all, I rinsed off all my equipment, my water bowl, ball brause, bubble wrap and fulling cloth to make sure there was no soapy residue around. Then I laid out my sample (4 layers). I checked the pH of the water, which was neutral. I then added a quarter cup of vinegar to my water and checked the pH value which was now 4. The water was tepid. I wet out the sample. The first thing I noticed was that the water did not soak into the fibre as it usually does when soap is added and it took a lot more water and pushing on the fibres to encourage them to soak up the water. When I turned the sample over, there were still dry patches so even more water was needed! That (plus the smell) were the only differences I noticed. It felted easily and shrank down 47%. When it came to fulling the sample, I heated up the water/vinegar solution in the microwave. One advantage of using the acid solution is that the ‘water’ could be used for the next project. That said, I reckon it could be very hard on the hands if this was my main way of making felt. So I am going to decant it into a spray bottle and use it to clean windows, no waste!

We have a beautiful Norweigan Spruce tree growing in our front garden.  I like to refer to it as the gift that keeps on giving because it constantly suprises us.  For example, last year, while I was mindlessly staring into the garden, it launched a pollen bomb.  For those of us (this included myself up to this  point) unfamiliar with the term, the tree released it pollen all in one go.  So the whole tree was suddenly surrounded by a yellow haze.  In an instant, the haze lifted into the sky and was carried off in the wind.  It was truly spectacular.  I have lots of allergies and pollen would be one of my nemesis but I would put up with the discomfort to see this again.  Here’s a short Youtube video on the topic.  Our tree did it on its own while this one was shook but you will get the picture https://www.youtube.com/watch?v=rh2Da8Ms45M

Anyway, back to my story.  I found I had lots of fallen pine cones at the base of the tree so I gathered only some of them and put them on to boil in my dyepot.  The house was filled with a gorgeous pine scent during this process. Once I had extracted the dye from the cones, I filtered the mix through some muslin to remove the resin. The colour was absolutely stunning – a jewel red. I used it for four experiments; first of all, I extracted a litre of the liquid to make a pigment, then I used the remainder of the dyebath to dye some fibres (unfortunately I do not have a photo of the results and they are now added to my mountain of experiments (unlabelled – what was I thinking!). Experiment number three involved adding some of the leftover dye bath to citric acid to make a pigment. In the last experiment I left the liquid alone and just added the alum and soda crystals to separate the dye from the liquid base. Once separated, I filtered the liquid out of the pigment, then dried and ground all the results. So, I ended up with three different pigments and some dyed fibre experiments. I have inclluded a photo of the pigment made last summer and the result of the latest experiment in winter. There is quite a difference in the colour as you will see from the slide slow:

There’s a back story to the last project. We have a number of fruit trees in our garden. Unfortunately we lost one of our plum trees last year. This was despite our eldest son’s (naturally green fingered which he inherited from paternal grandmother having skipped a generation) efforts to save it. Finally, there was no other option but to fell it. He also decided to remove the roots which was a big job as the tree had been there a number of years. It became the focus for my last household and garden project. I wanted to find out if the dye from plum tree bark differs from the dye from plum tree root. To find out, I decided to peel some of the bark off one of the branches. I did the same with the outer cover of the root. I soaked these in different containers for up to a week. Now, here’s what I found interesting. Whereas I needed to heat the pine cone liquid to extract the dye in my previous project, this was not needed for the bark/root projects; the dye naturally extracted sitting in its vessel and the high tannin level meant that all I needed to do was soak my fibres and fabric. It was like magic! I wanted to use the dye in some small vessels I made for the 10g challenge I spoke about in my last post. Then, I took what remained in the dye pot and made pigment from it. I found it interesting that the result from the plum bark dye yielded a lighter colour dye but a richer pigment – the root was the opposite. The fabric/fibre experiment produced is a lovely rich golden hue on the different surfaces. Also, it turned out to be another gift that kept on giving as each time I used up all the dye, I added more water to the two mixes and it kept extracting dye – I could not even notice if the dye was weaker in the second round than it was in the first. In the end I composted the bark and roots as I needed to move on with life (I got busy again!)

Here’s a quick run through in photos:

Do you use household or garden items in your textile practice? Have they ever surprised you? I would love to hear about your experiences.

Helene x