Eye Glasses Holder

Eye Glasses Holder

Sounds like a quick and easy project, right? I thought so too. This is a case for my glasses to go in when I’m in bed. It will hang off the little bookcase beside my bed. Probably better than on the edge of the bed where they sit now.

I picked up some very pretty little batts at a local fibre shop. It is a combination of Canadian Ramboullet and Merino. It is sold as a wet felting wool, among other things. . The colours I picked were mottled and it is quite a short fibre. I did not do a sample as this is such a small project it is the sample. The batt is 50 grams and I don’t think I used half of it.

The other factor in doing this now was I knew I was going to the store to pick up wool for my workshop on the weekend and could pick up more if I liked it. I thought this small project would be just the thing.

 

This is the shape of the resist. I will fold the long part over to make a loop and use a button to hold it in place.

                                    

I split the bat so I could keep it thinner and still have it go in 2 directions. I am not used to using batts but they are a fast way to do simple layouts. After the first layer, I added some offcuts of cotton batting I thought might make an interesting raised texture. I wet it all out. It took a little more soap than expected to wet it out. I think there is some lanolin still in it but it is not greasy feeling.

I rubbed it for a while. it did get a skin but wasn’t starting to tighten up. I did a bit more and switched to rolling. I did that for a long time, flipping and changing direction, rolling on a ribbed mat all the usual stuff but no shrinkage. This was after about an hour rolling. You can see that it hasn’t shrunk at all

 

Next was heading home to the kitchen to rinse with hot water and get tough with it. I scrunched and rolled it in my hands and threw it in the sink. Maybe a little bit of shrinkage. It is definitely felt. It is holding together and I have removed the resist and the insides are not trying to stick to each other.

So what next? Time to do some laundry. I put it in a small delicates bag and tossed it in with a load of laundry, and then into the dryer. No pictures of that, I was too frustrated by then. I was also thinking that I would take it out and it would be 3 sizes too small.

This is the result, a very small amount of shrinkage, mostly in height. This is actually after it was dry and I had turned it inside out and then back because I forgot to take a picture.

I turned it inside out which made it stand open more so that is better for the purpose. I had to smooth out the edge divot from turning it inside out . the felt is quite thick.

                           

 

It will work for the purpose. My glasses ended up a little too far down in the holder so I stuffed a little wool roll in the bottom so my glasses are easier to get hold of. It’s not a big difference but I can grab them a bit better. more wool may be added.

                                    

I just need to add the button and I am good to go.

I did let the store know that the wool is not good for wet felting. They said the mill is trying different ratios of the wools to find what works best. I suggested it would be good to make socks that would be fine in the washer and it is still good for needle felting.

Spring is here, My hubby has veggie growing fever. He has half my table as one of the few cat-free areas. Why do cats like to lay on top of seedlings?

19 thoughts on “Eye Glasses Holder

  1. Hi! Maybe the lack of shrinkage is due to the shortness of the fibres you mentioned early on… I will definitely copy your idea for an eye glass holder. 👍🏽🌻

    1. Thanks. share a picture through the community menu above if you make one. Maybe someone who uses short fibre would know about it shrinking differently. Ruth how does it work for you?

  2. Me too. It’s a great idea Ann, only I’ll need to make 4 holders. I wear contact lenses during the day, so I have reading glasses, and computer glasses to wear over them, Then after the lenses are out I have bifocal glasses for general wear and a pair for using the computer.
    I admire your perseverance Ann, I’d have given up less than half way through, but then I don’t have your patience obviously.

  3. Must have been frustrating but the holder looks great, albeit a bit bigger than you’d intended.

  4. I love your saga of perseverance! The fiber’s resistance to felting makes me wonder if it was mislabeled at the mill or even at the farm. Even so you cleverly got your lovely, very practical eyeglass holder. I may borrow your idea!

    1. Thanks,
      It is odd wool. It is felt, it is solid. The not shrinking is an odd thing. Usually non felting wools make a spongy sort of prefelt and won’t go any further in the process. If you make one share it with us in the community gallery.

  5. It’s a lovely holder for your night-time glasses – good idea and lovely night colour too.

    Do you need a button? Could you just hang the case up by the flap and take the glasses in and out fuss-free – or would that not work?

    1. Thanks, Yes it needs a button. it has to go around part of the book case. It doesn’t have solid sides. when I get the button on and it hung up I will take a picture.

  6. Good on you for finishing, Ann. I use short fiber merino batts all the time and I would say that they shrink more than regular merino roving. The surface is very tight and smooth and the shrinkage can be up to 50% if you keep working it. Not sure why yours didn’t shrink down, seems really weird.

    1. That was my thought too. I was worried I wasn’t making the resist big enough as I thought short fibre batts shrank more. I may try using the batts for design. The other wool make pull it in but the design would be puffier and look interesting. Another thing to try.

  7. Interesting that your fibre felted so well without shrinkage, not come across that before. Padding the base of the holder was a nice save!

    1. I haven’t come had this happen before either. When I have had felt that didn’t shrink it made a soft, barley prefelt, spongy felt. I may have to add a little more fibre to the inside but I think it will be good.

  8. Good job. Lovely specs holder to boot; I love the colour, and the loop is a great addition to add function.

  9. You’ve created a nicely Felted case all things considered. Albeit bigger than intended you’ve resolved that problem ingeniously with the padding.
    Kudos to you all round.

    1. Thanks Antje, I am happy with it in the end, even if it’s a bit big. It would have taken as much wool to make a sample, so I am glad I just went ahead and did it

  10. I disappeared down a rabbit hole there Ann seeking information on the breed you were using. I could sense your frustration in getting the piece to shrink but it seems to have migrated through the cotton batting well. Quite the mystery.
    That said, the result is beautiful and a real saviour for your glasses. I love the pattern. Good that you could give feedback to the store too.
    Helene x

We would love to hear your thoughts!

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Discover more from Felting and Fiber Studio

Subscribe now to keep reading and get access to the full archive.

Continue reading