Browsed by
Tag: felting layers

Finally Finished and Playing with Rocks

Finally Finished and Playing with Rocks

I have finally finished my pouch. Yay! I am not sure how big I want the individual spaces in the bag to be so I have just basted the divisions for now. If they are working fine I will sew them in permanently.

 

Here it is full of things. and some things that didn’t make it in. As you can see it’s not dedicated to one kind of thing. It’s a way to keep all the smallish stuff from filtering down to the bottom of the basket where they are hard to find.

 

 

and all rolled up.

 

Here is the basket. First I put the liner in. It’s a thick, fairly stiff fake silk scarf. I can’t imagine it was nice to wear which is probably why it was in the secondhand clothing store in the first place. It’s great for this job.

 

Adding everything into and onto the basket.

This slideshow requires JavaScript.

 

There was even room left to add my guild library books when I got back to the house.

I am sure you are all as tired f hearing about the basket organizer as I am so it is now time for something new and more colourful. I have been seeing felted rocks popping up on Facebook a lot. I figured they looked like a pretty obvious and easy thing to make, so I will give it ago. The first one I did use floor underlay resists.  I started with a pebble. I covered it completely in wool.

 

 

I cut out a resist a bit bigger than the wool covered pebble and then added the top put the resist on the top of the rock and folded the wool around. then I cut a bigger resist and did it again and marked the top. It was a bit awkward. I should have worked the other way up but where’s the challenge in that. LOL.

 

It fulled down quite fast.

time to start cutting, I rubbed each cut to heal it before doing the next cuts. I don’t think you can see it but the bottom of each layer is fully attached to the one below it.

 

I sat it on a green lid to dry, looks really striking there.

 

 

That worked quite well. Now for a different way.

For this one, I used plastic wrap to keep the layers separate. I cut a small hole in the underside so the layer would be attached to each other.

 

wool wrapped pebble

 

first layer wrapped in plastic

 

3rd layer

I wrapped the last layer in plastic I just rubbed it and rolled it around in my hands as if I was making a felt ball. I did it longer to make sure the inside layers were felted as well. While wrapping I lost track of the top and bottom. Naturally, I picked the wrong side to mark. I cut the first hole and it was attached to the one below so I kept cutting down to the pebble. I planned to stretch each layer, but with it being quite small there wasn’t much stretch or even room to get anything in between the layers to try and stretch.  so In the end I just fulled it tight around the rock.

 

Here is how they compared in size before felting

 

And how they compare with my hand to show the sizes

 

See Lyn, not felted rocks but felted rocks. Ha Ha Ha :O)

%d bloggers like this: