Prefelt and Structure
If you have been following my experiments lately, I have been trying felt rope as a base for structure. I had a request to try the same experiment with prefelt to see if there was any difference between the two.
I made a piece of prefelt and cut it into strips with a rotary cutter. I decided to use two strips to give the same weight as the felt rope in my prior experiment. I also covered the same resist with two layers of wool laid perpendicular to the length of the resist.
I used two strips of prefelt and wrapped around the resist. These were stitched in place with yellow 30 weight machine thread. It was easier to stitch the prefelt than the felt rope.
I then covered this with two more layers of wool over the prefelt strips wrapped in the same direction as the first layer. The photos above show the piece after I removed the resist and the photo on the right is a closer look at one of the prefelt strip areas. It definitely shrank differently than the felt rope. The rope got very wavy under the felt.
And here it is after fulling and shaping. The only different thing that I did this time was to continue to stretch the prefelt areas into circular shapes as I was fulling. I think that helped to smooth out the circles compared to my last try.
And here are the two together. The one on the left is made with felt rope and the one on the right is with prefelt. Essentially the same thing. As you can see, the rope is a bit wavier but that might have been avoided if I have stretched it more during fulling. The thing I like about this experiment is that the prefelt works just as well as the rope and for me, it’s much easier to make. So I think my experiments with felt rope are over. 😉