Browsed by
Tag: felt rope

Felt Rope and Structure Part Three

Felt Rope and Structure Part Three

Comments 16 comments

I have been continuing my experiments with felt rope and structure so here we are at part three. (Part One and Part Two, if you missed them.) I had gotten so many different suggestions that I wanted to try out a different method. This involved stitching the felt rope to prefelt so it would stay in place.

Luckily, I found some already made felt rope so I didn’t have to spend time making it. But, it wasn’t long enough to spiral around the resist but I had three pieces that would work. My resist is bigger than the last one where I made the felt “pickle”. It’s about 8″ x 15″ (20 x 38 cm). I covered the resist with two very thin layers of wool and laid all the wool perpendicular to the long side of the resist. This is the opposite direction to what I used on the the felt “pickle”. I then wet down and felted the piece to prefelt.

Here it is. If you look carefully, you will see a few holes. But I decided not to worry about it since I was adding a second layer of wool over this one. I put the felt outside and it dried in just  a few minutes. It is 96 degrees F (35+ C) here today.

Now to stitch the felt rope to the prefelt. I used a matching color machine weight thread and hand stitched the ropes in place. You can see them stitched on in the right hand photo. I stitched the ends of the rope together so it would be a continuous circle around the wool.

Now to add more wool over the top of the stitched ropes. I kept the wool running in the same direction as the first layer of wool and covered with another couple of thin layers of wool. Then to start rubbing and getting everything to hold together. I did appreciate that the ropes were held in place well and didn’t shift or move during the felting process.

Here’s the piece after felting and beginning to full. The resist is still inside at the moment. I just snipped off one end to pull the resist out.

Next up was fulling. Here is the piece after I finished fulling. The felt rope got really wavy and wasn’t staying firm enough to hold a circle. I’m not sure why but I completely forgot to stretch the felt rope as I was going along so it would stay more circular. But then I had an “Aha” moment or a “Duh” moment (whichever way you like to think about it) and I thought I would try and stretch out the rope so it would dry more round.

Here’s my felt yard art on a stick. The rope didn’t stretch out completely but it is circular enough for me. Another fun experiment completed and the stitching worked perfectly to keep the rope in place while felting. I just need to shave off the fuzzies once this has dried. What should I experiment with next? Any good ideas?

Felt Rope and Structure Part Two or How To Wet Felt A Dill Pickle

Felt Rope and Structure Part Two or How To Wet Felt A Dill Pickle

Comments 8 comments

I showed you my first failed experiment with a felt rope and using it for structure. I got loads of good ideas on how to improve the experiment and took those suggestions and came up with a plan.

First off, I decided to work around a flat resist and use the same kind of wool for the felt rope as the rest of the surface. So I used mixed 56’s that I hand dye. I dry felted a felt rope from the yellow wool. I didn’t add any water at all but just rolled it dry until it was holding together. It wasn’t firm at all. I left the ends loose so that I could make sure the rope was well attached.

I covered the resist with light green wool with a couple of thin layers all running lengthwise to the resist.

I then wrapped the felt rope around the wool covered resist and added a couple more thin layers of wool in the light green. I added a bit of darker green to the ends.

And then I rubbed and felted and began fulling before removing the resist. Here it is after I took the resist out.

And then I fulled it into submission. You can see how much shrinkage there was in comparison to the resist. It is very hard and certainly won’t lose it’s shape.

And here it is after I shaved the surface a bit. It could use a bit more shaving but I haven’t had time to let it dry yet. So once it’s dry, I will shave it again. To me, it looks like a dill pickle or perhaps a small minnow? It is much more in line with what I was thinking when I first tried the experiment. I will have to try it on a larger scale. I’m not sure that the felt rope adds any advantage over prefelt cut in a strip. Perhaps if I have gotten the rope a bit harder, it might have effected the shape more. Next time, I think I will lay the resist wool going around the short side of the resist instead of lengthwise. I would also use less wool on the ends of the rope or just use a cut strip of prefelt.

 

 

Experimenting with Felt Rope and Structure

Experimenting with Felt Rope and Structure

Comments 17 comments

I thought I would move on in my experimentation with creating structure in felt and differential shrinkage, this time using a felt rope. I’m not sure why I thought this was a good idea but I suddenly remembered why I don’t make many felt ropes.

I used a batt of yellow short fiber merino and tore it into a strip. I then worked a bit on trying to dry roll it to get some of the air out. But that wasn’t working too well so I added soap and water. The rope turned out OK but is far from perfect. I always forget how much patience these take to do them correctly. Now that the rope was done, how to add the felt to this spiral structure?

I came up with the idea of covering a PVC pipe with lime green mixed 56’s wool. I probably should have used merino but this is what I had grabbed for this project. I covered the pipe with wool and then wet it down.

I wrapped the rope around the wool covered PVC pipe and then began adding wisps of wool over the rope. I wet it down as I went to hold everything in place. I then spent a fair amount of time rubbing and working around the rope so that the wisps would stay in place and hold the rope down to the felt. Apparently, not enough.

Here it is after felting. What a mess. The ends of the rope were coming loose and it looked like my dog Edgar had been chewing on it. (Not really because he would have torn it to shreds in a matter of seconds.)

I took a break and then decided I need to full it much harder. I found a thinner stick to put in the middle and worked the piece with soapy hands as well as rolling it on the ridged mat and banging it hard against the table.

Here is the end result. Not appealing or impressive. But I might try again with a much thicker inner and outer layer of wool.  I also will probably try wrapping the rope around a flat resist instead of a 3D object. I can always full around the pipe or dowel rod after the felt is holding the rope together better. Not totally a disaster but close! I do think it’s good to go ahead and post about something that doesn’t work out as planned. Perhaps someone else will learn something from my trial and error experimentation. And perhaps you can empathize with me that not all projects are beautiful or perfect. What have you experimented with lately?

%d bloggers like this: