Exploring an unusual shape with a simple resist
Hello friends!
I am sure that there are many here who are super advanced 3D felters, but , ahem, you know by now that I am not one of them: this post will be very frustrating for people able to instantly visualise the right resist for any 3D shape or occasion, I warn you in advance so that you can grab your cup of tea or coffee or whatever and go do something else instead of finding yourself screaming at your computer “You are ruining it! Please, stop this nonsense! I can’t watch!” or some similar stuff.
Since I warned you and since you are still here, I can start without a qualm with the description of my new exploration into the magic world of wet felting 3D shapes with a resist.
I am very bad at guessing the right shape of a resist to obtain a tridimensional object, and I am always pretty amazed at other people’s ability in devising the right resist at first try, maybe with just a little bit of planning and thought involved: why, it seemed like having to understand the most complex mathematical problem with just times tables knowledge when I had to figure out how to do it, and my shape is very simple really.
I decided that I needed the practice, practice makes us perfect and all that, and also I had an idea and I wanted to see if I could make it for real. I started with the simplest resist shape that I know, the round resist that one uses to make a round bowl, you don’t get more basic than that. I have used that same resist for years now, it is familiar and friendly. I wanted to end up with something like a small round bowl with a closing flap (that’s easy, I just avoid cutting through the whole opening…ha ha, how I underestimated that bit!) but, and that is the exploration part, with two small spikes inside of it. And the spikes can not be added afterwards (that would be cheating) and the resist must be in one piece (I find resists with added pieces even more difficult to fathom).
I guess that for a lot of people that would be very easy (you are already nodding and going ‘Yes, yes, sure, an easy shape, I can see it in my mind’), but my brain was just in knots over this, and I had to grab pencil and paper to try and think my way out of this, and it didn’t even help that much, as paper has a habit of being flat, you know, so it does not really help with thinking in 3D, but it seemed just that I needed all the help that I could get.
Anyway, that is my brilliant work of planning, and do not laugh too hard, it took me half an hour of thinking very hard about it, with my kids saying ‘ Mum, why are you waving around with your hands? It’s just weird.’ and of course I had to ignore them:

Yes, it seems a bit like a rabbit, I know, and not very regular: I was testing the idea and my vision, not really bothering with the details and fine print at this stage.
To test my resist, of course I had to wet felt the actual object, and all through this I promise you that I had no idea if my resist was going to result in the shape that I had imagined, so I was pretty nervous.
Here is how I started: I wanted the inside of the bowl to have colours and the outside to be white, so that I also had to think about what colours to put first because those would be the colours that were going to be in the inside of my small bowl if everything was going as I had thought.


I covered my resist with colours first, and tried to avoid too much wool on the spikes: it is actually pretty hard to avoid it piling up on the smallest bits of your resist, as Merino wool tends to have the longest length so it tends to be folded around your small spikes, and you want them evenly covered and you want them to have enough to stand up and be stiff at the end, but there is an issue if it is too much. Anyway, I did not manage to avoid covering my spikes with too much wool in the end: I have to do some more fine tuning of this next time, eh.
I wetted and lightly soaped the first layer, on both sides of my resist, then covered it with three more layers of Merino but white.

I wetted and soaped the whole, gave it some rubbing all over, then started a gentle rolling in all directions until I sensed the prefelt starting to shrink a bit.

It was time for cutting out my resist: that is a part that always scares me a bit, as where you make your cut is going to be it, no going back from that. Yes, people are going to tell you that you can always fix that one way or another, but no, fixing it is not the same as getting your hole cutting right the first time, just think about the whole hassle about fixing it that you would very much like to avoid…I bet that nobody has learned as much about fixing things as I did on many occasions, and I tell you that sometimes much of that learning has been about swear words, I am afraid. I would just like to get it right sometimes, thanks.
So, I made my cut, with trepidation in my heart.

Then, the fun part that was discovering if my idea would work: I turned the shape inside out and used my fingers to also turn the spikes inside out on the inside of the bowl, and voila:

I had quite a bit more work to do in it, rubbing and shaping, but as for my part, the experiment essentially worked and I proved to myself that I can do it, I can think about a 3D shape and a 2D resist that can result in it, at least if we keep it very simple and I base it on shapes that I already know very well.
I will come clear, I am not totally fine with the final shape (not as round a bowl as I would have liked), the spikes (I wanted them smaller and not as thick), and the closing flap (what is that? no, we are not there at all.), but I can work on them also slightly modifying the resist. I need to make my resist more of a regular round shape at the sides particularly, but I want to try out extending a bit the part that is opposite the spikes to make a bigger closing flap maybe, and I will make smaller and more regular spikes. I also want to use less wool next time, I really do not want the whole to be as thick as it is now.

I hope that other beginners like me will find this journey of exploration interesting and will be able to say to themselves ‘Well, I could have done that, and I could have done it better!’.
Good luck with your explorations!
Kiki
http://www.kikistextileart.com
@kiki.textile.art