Saturday

I hope you are well rested after your nap at the end of my last post. If we want to have accessible parking, we should get going early! Don’t forget to bring a bit of money, there are other vendors and the second-hand game sale is today. Now off to the car with an extra item (ok, Glenn was carrying the extra item). Wow, the highway in town is not busy this morning, oh yes, it’s Saturday, not Monday!

I am again set up by the open games area. I think they are used to me sneaking in beside them by now. Today I brought in my little Canadian wheel, the Lendrum Rook. Gord Lendrum, a Canadian spinning wheel maker, made about 40 of them in the mid-1980s. Mine needs a bit of repair, it was at least second-hand when I got it. The weaver spinner whom I was chatting with on Friday said she would be dropping by, I can show her how this one works and hope it’s similar to the wheel she has at home.

6.1) The Rook wheel and some pretty roving were added to yesterday’s felting stuff.

I worked for a bit while watching for the line to start, then it was time to line up for the sale. This year, I was second in line! Again, with the same person in front of me, last year I was third in line. This year, Glenn had me hunting for another train game. This one was called “British Rails”.  It still does not sound as fun as sheep.  While the organisers were setting up, they put a pile of train games close to the checkout. I was able to see them from the line! I know where to check first!

6.2) A quick peek as the games are still coming in this morning to the sale and are being put out on the tables. By 10 am, the time the sale starts, games more than fill every table!

Last year, I had bought some of the games Glenn had brought in to sell, because they looked like ones he would enjoy.  This year, I know his badge number, so I will try not to do that again! Shortly before 10 am, I looked behind me to see how long the line had grown. It went all the way across the curling rink!…. turned and started up the far side of the rink, passing where my table was and extending past the open gaming section!!  Oh my! I am glad I am second. I put away boyfriend-mer, who I had been working on while sitting in my portable chair (ok it’s my studio on wheels… er.. alright it’s my walker) and got ready to shop.

6.3) The line goes across the curling rink and then proceeds along the far wall

10 am arrived, and they let the shopping horde surge forward. All of us are trying to fit into the confines of one little corner of the rink with tables stacked high with piles of games. Some were in rows on their side, but most were piled multiple games high. All the miniatures for war gaming were on the back table, I skipped that for now and headed to beside the cash where I had seen a pile of train games. (You may want to go the other way around the table and keep an eye out for the elusive sheep games! Even an alpaca game could be thematically fun?)

I picked up the train game he wanted, found a few more and spotted one of those unfun 18XX games Glenn likes, sold by badge number 118, oh Drat! He is badge 118, so I better not buy it for him!  There were lots of pretty boxes to look over. I was trying to shop for Glenn and find some games for my brother’s cottage, too. I even found another Sheep game to add to the collection. This one is for 2 players and has little wooden sheep tokens.  They are sooo cute!!!

I finally escaped the crushing throng of game seekers and made it back to my little table to resume work on the new mer-person. Building up his torso, now his head seems too small.. ok add more brains!  (think zombie voice “Brains”) Glenn returned from his morning train game, victorious (he came in first) and was checking over what I had found. I was successful in my game quest for him, and he was pleased with the others I picked up.

6.4) “Agricola” is a 2 Person game about raising sheep. (We have not tried it yet, but the sheep are wooden and look very cute!)

 6.5 Some of the Games I found, including what he had requested!

We took another peek at the games as the crowd thinned. Odd, I saw lots of things I had not noticed the first time. I added a couple more to the pile while Glenn got us lunch. The curling rink caterers are very good this year. I had asked for grilled cheese with bacon, but got a club sandwich, which was very tasty, but seemed short of the grilling and the cheese. Well, maybe we can have that for dinner?

I did promise I would get back to work on felt-related matters (this is a gaming and felting convention!).  I continued slowly building up the muscles on my new Mer-Boyfriend.

7.1) stabbed in the back by a felting needle, but he has a bit more latts!

7.2) Lounging on the bag of world of wool core carded roving

7.3) Ooh, I have reached the glutes and the first fins!! Oh, the possibilities, they have to be good glutes, to attract Miss Teen Mer back to the office when I get home!

Then I realised the weaver spinner I was speaking with yesterday should be arriving soon, back from her shopping trip to Wabi Sabi (that’s one of the local yarn and fibre shops in Ottawa). I had better get ready for her arrival and switched to my wheel. I have a bit of yarn on the bobbin and some of the same fibre left to spin.  Let’s finish spinning that and then wind it off into a double-ended ball. That means it’s wound so you can pull from the inside of the ball and the outside end of the ball at the same time. The advantage to this, over plying with two bobbins, is you always get to the middle at the same time from the outside and the inside piece! With 2 bobbins, often you have one bobbin still having yarn on it when you have emptied the other. The drawback of a double-ended ball is that it can all go horribly wrong and get tangled if you are not careful (and sometimes even when you are careful), but if you’re frugal or only have one bobbin, this is a handy way to ply yarn.  Oh yes, not all of you spin, plying is taking the single yarn you just spun and spinning it back in 2 layers or plys in the opposite direction you spun the single ply. See clear as mud! But it keeps your yarn balance if you do it just rite. If you knit with energised yarn, you can make diamonds instead of squares, which can be interesting but probably not what you wanted.

You can weave with energised singles yarn (there is still a good amount of twist energy present in the singles). There are some medieval fabric finds that are woven in plain weave (under over under over under over……). Because they are warped in little groups of yarn spun with the twist going one direction (Z) beside little groups with the twist going the other (S), when you take the fabric off the loom, the twist fights with its neighbour, producing what looks like some complicated twill all in plain weave. I will try to show you that someday.

7.4) cleaned off the little bit of yarn on the bobbin, ready for spinning.

I got back to felting. I continued to asked anyone who stopped to chat the questions; if they thot an Orca or Sturgeon boyfriend would be better….I continue to get the orca would look better, but the sturgeon voters kept reminding me about the horrible, possible slaughter of her family if she dated an Orca!

8.1 The open gaming section filled up after the game sale had slowed down and remained full all day.

8.2) I added sewing pins to give me eye locations while I work. It’s getting very busy with games now.

Since there is no sign of the spinner/weaver, let’s take a quick look at what gaming is happening today.

There were games I had no idea what was happening, and battles setting up for carnage and slaughter

9.1) Not a clue what is happening, but they seemed very focused and having fun.

9.2) This is a racing game that was being played on the table beside me. Like many of the games I was seeing, it has lovely graphics.  Even if watching cars drive in a mostly circular track isn’t really your thing, it’s still really pretty to look at.

9.3) Definitely impending carnage!

9.4) Some of the war games with figures had very interesting architecture or terrains

9.5) This one had a part of a town, I don’t remember what kind of army was fighting through it. It was possibly more normal than guys in space suits from the other table.

Being set up at the other end of the hall from me was a large metal cube that rotated on a frame. That looks intriguing, shall we go have a look?

10.1) This game is for 12 little magnetic robots. You can see the little robots on the nearby table, all sides of the cube is where they will be racing.

10.2) A robot racing game on a cube

This metal cube has magnetic-backed maps showing pathways on each side. The robots are also magnetic and will drive around the various sides of the cube. Each robot has a hand of cards; they have to select five instructions for their robot to follow like a program, and lay the cards face down in the order they want the robot to move. Everyone reveals one card at a time, and the movement occurs. Unfortunately, things can go horribly wrong when robots try to land on the same square or miss count and bump into a wall or other obstacles.

10.3) A good strategy seemed to be to take a picture of the part of the board your robot was on, then select your cards from your photo(then hope for the best).

 10.4) As you can see, the robots are dispersing on two sides now

10.5) They are working through the second card of this round.  They are having lots of fun, and it’s been fun to watch.

I wandered back to my felting but again got distracted by all the cool details in the  3-D printed dungeon architecture.

10.6) You can see the layers, so those must be a sedimentary plastic rock, maybe sandstone? Such fine detail in the 3-D plastic!

10.7) These little skeletons were so cool, but where would I put them? I did enjoy looking at them over the weekend, and they were quite photogenic for skeletons.

Glenn has returned victorious in another train game, and I was wiped. Even though I had not seen the weaver spinner yet, it was definitely time to go home to sleep. You can stay on if you like, and I will meet you back here for day 3 tomorrow. I hope to get started on the fishy parts then!