Browsed by
Tag: #wetfeltedflowers

Flowers in a vase: a wetfelted abstract project

Flowers in a vase: a wetfelted abstract project

Comments 13 comments

Hello all!

First of all a recap of my recent activities to give you a background to my most recent piece.

I have been very taken with preparing and then attending my local Art Trail in the first 2 weeks of September: if you remember, my last post was about how I prepared a few new felted items for it, because I wanted to bring a mix of new and old things.

One of the Bourough of Ealing Art Trail banners on a railing at a local park.
It’s quite the event in our local community!

Here is what my stand was looking like at the beginning of the first day of the BEAT (Borough of Ealing Art Trail):

Kiki Peruzzi's stand at the Borough of Ealing Art Trail 2026 is a small table covered in a white cloth. Some scarves are hanging from a small rack on the left, and the items on the table are all small and brightly colored, with some small white framed artworks and other small items. There are small windows above the stand and the walls behind the stand are bare bricks and crumbling mortar.
My small corner. I actually did not bring a lot of items, as I could always get more from home if needed and I did not want to get a very crowded look.

 

A closer look to Kiki's stand at BEAT 2026. At the center of the image, there is the table with many different white framed artworks, two felted bowls holding small felted objects, and some coaster sets in plastic wraps. In the background there is a brick wall and in the upper part of the image there is a window letting bright light come through.
A closer look at the table. You may be able to spot some of the items I was working on the last time that I wrote a post.

 

The left hand side of Kiki's stand at BEAT 2026, with a closer glimpse to some colorful felted scarves, and some small artworks in mixed media and felt.
Here is a closer look at the left hand side.

I have to say, this event is the most fun one among the various exhibitions and events that I participate in with my local art group, the Ealing Art Group: we meet tons of people, and our families and friends are encouraged to pass through. We set up demonstrations of our art in the little yards in front of the hall (weather permitting), to pass the time and  to call passers-by inside (some of us tried also to improvise a little dance routine to catch the attention of people going by, but we felt that it was a bit too much in the end..). And we chat a lot among ourselves, as it is the only time in the year when we actually pass hours together in the same room (the other exhibitions are manned or womaned on a rota as a group, whereas each of us has to take care of their own stand in this one).

Kiki Peruzzi smiles while demonstrating wet felting outside of the Art Trail venue for her local art group. There is a white plastic table set in front of a brick wall decorated with colorful bunting. On the table there are some wool bags in white, teal, grey and pink. There are also a green sprinkler and a plastic container with some water, and on the right there is a small log on top of some white netting and bubble wrap. Kiki is holding some wool in her hands. She is wearing a white sleeveless top and dark blue short trousers.
I had an interesting time demonstrating wet felting while battling the wind and chatting to visitors: you can see it in my please-take-that-shoot-quickly-before-it-all-flies-away smile! I like to think that at least I caught many children’s hearts by giving away wisps of pink and green wool all during my demos!

This year we had a brilliant attendance on the first weekend, weirdly not matched by proportionally higher sales, and usual good attendance on the second weekend: we think that it was because other non-related events were going on in the area during the first weekend, so more people were out and about.

While I was in the middle of this, plenty of new ideas for felting and mixed media pieces were coming to my mind of course: I do not know about you, but that is what happens to me whenever I have no time and I can chat with other creative people and see what they make.

One of the ideas that I thought that I could start on without much fuss was a new wet felted piece about flowers. I need to explain that the artist exhibiting her watercolour pieces right in front of me in the room, and a good friend, is very fond of representational abstract artwork of bright flowers, and I was inspired to make a bright and colourful small piece. What I really set up to make in the end, though, was something quite different.

First of all, I considered that I had bought two canvases 65 x 90 cm (25.6 x 35.5 inches) that I had never used yet, so that a bigger artwork was in order. And, most of all, the base prefelt that I prepared for my artwork was in pewter, as I did not have enough wool of a brighter colour and also, to be totally candid, when I actually got to it, I did not feel like a brighter colour for my base.

So, you just have to take my word for it, my initial idea was of a jolly and quick little flowery piece, but good intentions did not last the first five minutes of actually setting up to make something for real, as it so often happens to me.

I put my chosen canvas on the working table to understand the approximate size of my base felt and started to lay the wool out, from the setting up of the edges to the filling of the area inside them with two layers of Merino wool. In hindsight I maybe should have gone for my usual 3 layers for the base, but as I was laying out the wool to cover the whole area I had started panicking that the project was too big for the time that I had, and so I was trying to cut times where I felt that I could. That resulted in a coverage that was not as good as I wanted for it, also because in the following steps I ended up deciding to not cover all the base with other colours so as to provide another layer on top of it, as I often do instead.

That is how I started:

There is an oval table covered in a white towel and bubble wrap. On it there is the outline in pewter wool of a big rectangle
The size for this new piece was almost at the limits of what I can make on my table when it is closed.
On an oval table covered in a white towel and bubble wrap there is a big rectangular shape almost completely covered in a first vertical layer of wool.
I tend to layout my base layers not very carefully, as it is supposed to just be a support base to the actual piece. This was my first layer.

After laying out the base and lightly wetting and soaping it, I started laying out the colours for the background from the darkest greens and greys to the lightest (light lime green, yellow and light greys and white):

On a table covered in a white towel and bubble wrap, there is a work in progress wet felted piece by Kiki Peruzzi. The piece at this stage is a big rectangle in wet pewter wool with a build up of background wisps of wool in dark and lighter green, dark and lighter grey, light yellow and white on it.
I tend to have light coming from the upper right hand in my pieces, it just works this way for me in most cases. It is also true that the table that I work on has light coming from the right naturally anyway, so maybe that is one reason.

I wanted a good contrasting area, so I went for pretty dark hues in my background, but that meant that the whole piece was already fast moving from a jolly uncomplicated colour riot to something more meditative and sober. I also realised that I wanted to not completely cover the pewter, as I was more and more reminded of my recent tondi pieces: it is just not possible to go completely away from your memories, I find.

I laid out my flowers in colours that were very bright and close to each other (two reds, a salmon, an orange and a yellow) and I added touches of darker shades to build their depth a bit, without going for realistic description. I wanted some white flowers to make the composition pop, and I went for some in white Merino wool with a center of natural yellow eri silk fiber, and some in white eri silk fiber with a few touches of bright blue mulberry silk fiber, for the shiny effect of silk that is reminiscent of oil paint shine.

I also realised that I needed some kind of vase or holding shape for my bunch of flowers, but I did not like the idea of a too solid shape when my flowers were just quick brush strokes of colours, so to speak. I went for just the outline of a vase in dark green, that could be variously interpreted and avoids weighting down the composition.

Here is what it looked like before the wetting, it seemed to me well full and with a background on the darker side, because the base in pewter was already wet at this point:

There is a work-in-progress wet felted piece on a table covered in a white towel and bubble wrap. The piece is rectangular and has a background in pewter, different hues of green and grey, with some yellow and white. The top layer has wisps of wool in bright reds, salmon pink, yellow, orange and white in different directions to expressively suggest flowers in a dark green vase. The upper layer of wool is not wet yet.
My composition before the wetting: the wool always looks more when it is still dry.

Then, I wetted and soaped the whole, and rubbed it gently under the netting. A bit of rubbing by sander followed, and I went on to the rolling very quickly. I do not need to roll it very much for my purposes, but I added a bit of additional rubbing against the bubblewrap in this case.

There is a rectangular wet felt piece that is almost all covered in bubble wrap for rubbing with a sander, on a table covered in white towel and bubble wrap.
Ready for a bit of sander rubbing.
A pewter work-in-progress felt piece is rolled into bubble wrap and rests on a table covered in a white towel and bubble wrap, ready for the rolling. On the table in the distance there is a glass half full of a clear yellow drink.
And here we go with the rolling, after some rehydration with an Italian favourite soda drink called Cedrata.

After drying it, that is what it looks like:

A wet felted artwork by Kiki Peruzzi is resting on a white canvas. The piece is rectangular, it has a pewter base layer and green and grey, yellow and white background. This abstract piece represents a vase of bright flowers in reds, salmon pink, yellow, orange and white.
This is before the ironing and to test the size of the finished felt on the canvas: it fits nicely as I wanted (I like my canvas to be seen all around the edges).

Because of the rubbing against the bubblewrap, it ended up with the piece developing a bit of movement around the edges, so that I had to iron it a bit to flatten it again after the drying.

I feel that it looks a lot less full than what I wanted, and I am pretty divided about it: do I work on it more or do I call it done? What I am thinking is that this piece would be closer to my idea if I added stitched fabrics in colours similar to the flowers to full up the areas in and around the flowers. I can not really explain well the idea that I have in mind, but I am thinking floating pieces of fabric here, very lightweight and not realistic. I also am very into textural pieces more than flat pieces, so I miss that textural element in this piece, though I understand that it is not what everybody looks for in an artwork, but I am really drawn to textures and 3D elements.

I have asked opinions about it to some of my artist friends during our breaks from the Art Trail work: mostly, they feel that the piece is fine as is, while some agree that I could work on it a bit more. I feel that they do not see in their mind what I could do with it and the right fabrics, because none of them are as familiar with textiles, but it may be that they genuinely do not feel that it will benefit from additions, with some of them mentioning the need to avoid overcrowding the composition.

So, what are my textile friends thinking about it? I can always try something and then unstitch it if I see that it is not going anywhere, but time is at a premium right now in my life, and I have so many UFOs in my pile already!

Let me know your thoughts on it, please.

In the meantime, I will take a bit of rest and relax:

There is a brown and orange Guinea pig sleeping snuggled in a soft cup in light blue and other bright colors, inside a cage with black grids and wood shavings on the bottom.
Repeat with our sweet Pumpkin: “Good nap, everyone!”

Kiki

http://www.kikistextileart.com

Instagram: kiki.textile.art

 

Community Art Installation

Community Art Installation

Comments 18 comments

I was asked by my local community arts centre to run a felting workshop to contribute ‘something’ to a community art installation to celebrate Queen Elizabeth II’s forthcoming platinum jubilee.  The wonderful Horsebridge Community Arts Centre in Whitstable is creating a ‘tea party with a twist’: everything will be hand-made and not necessarily from the usual materials.  Think papier mâché teacups and crocheted sandwiches.  The Horsebridge received a grant from Arts Council England to create their installation which meant participation was free but I would get paid to run the workshop – a win-win!

I mulled over what the ‘something’ might be and decided to run a workshop making wet felted flowers as table centre pieces.

I decided early on to take my colour inspiration from the Commonwealth flag – royal blue and golden yellow. This would reduce the choices people would have to make (which often take a long time!) and would be a change from the red, white and blue of our national flag.

I’ve not made flowers before so set about designing something that was as simple as possible to make. The creators were unlikely to have any felting experience and we were going to do this in 2½ hours – both demonstrate and make.

By now my friend Sue (a ceramicist) had agreed to run another workshop making slab pot vases for the flowers to sit in, so they needed to stand in a vase. I took some wool away on a trip with me and started trying out designs.

Prototype One: a loopy sort of flower made by laying out 5 separate petal shapes of wool (herring-bone style layout) then felting them together with a little wool in the middle.

I thought it was OK but getting the petals even was a little challenging and we’d have to use wire for the stems. I wasn’t sure they’d sit very well in vases and I generally thought I could do better, so moved on to my second design.

Prototype Two: I liked this a little better. It was laid out in a flat circle and the petals were cut part-way though fulling. It seemed pleasingly tulip-shaped. I wasn’t content to settle quite yet, though, as I had a few other ideas to try out.

Prototype Three: a more complex design laying out one larger circle of wool then covering it with a circular resist with a hole in the middle and laying out a smaller circle of wool on top of the resist, ensuring the two layers joined together through the hole.  Not surprisingly, I realised that this was going to be way too complicated to create in the time available. The fulling took a long time. I did like the blue edging on the petals though so carried this through to the next sample.

Prototype Four: I wanted to try adding a felt rope stem so it would sit nicely in a vase without using wire so needed a fairly simple flower shape if there was going to be time to add the stem to the design.  I made a felt rope in blue, keeping one end dry and fluffy to attach to the flower head.  The head was laid out in a single yellow layer, radiating out from the centre, in a similar way to prototype 2. I joined the stem as I wetted down the wool and covered it with a piece of bubble wrap with a hole in the middle for the stem to poke through.  This would prevent the body of the stem felting to the flower.

Once the flower and stem were at prefelt stage and the stem was securely attached, I picked up the flower by the stem and rolled it closed, mostly between my palms, to shape it into a 3D rather than flat flower.

Yes, this seemed just about do-able within the time and was reasonably simple for inexperienced felters to make.  If anyone ran out of time they could skip the petal-cutting stage and make a cone-shape flower so they wouldn’t have to heal all the edges and shape every individual petal.

By the time I got back to my studio the right coloured wool had arrived, along with some yellow tussah silk.  I already had blue and yellow nepps so I could set about refining my prototype.  A few design changes: I decided we’d run a second layer of wool just around the outside of the flower head circle as this would give the petals a bit more body.  Second, I’d add add nepps to the centre and a few strands of silk to the petals. Here’s the new layout.

And here’s the finished flower: advanced prototype 4!

Yes, I was pleased with the improvements and fairly confident the flowers would sit comfortably in their vases. I parcelled out the wool, nepps and silk and gathered together all the equipment ready for the workshop. It took a while!

Normally I teach a maximum of 8 people at a time but as this was a small make I rather recklessly committed to 16 – thinking I could have 2 people per table. Not a problem until I started to seek out 16 towels and 16 mats…..but it seems my hoarding tendencies came good! Cutting out 32 pieces of bubble wrap (16 of which needed a hole cutting in the middle) and 16 pieces of net started to feel like I was on a production line. Happily, though, I got everything together just in time for the day of the workshop.

Here’s the teaching room at the Horsebridge with everyone setting to work – a lovely light, airy and spacious room with people well spaced-out.

A couple of work in progress shots

And lots of happy felters with their beautiful creations.

The workshop seemed to go well and we produced plenty of flowers to add to the installation. I made sure people took photos of their own flowers as they can collect them after the event, if they want to.

Here’s most of them gathered at the end of the workshop.

Lessons: we needed more time! It’s hard to estimate how long it will take to demonstrate something and for people then to make it.  I’d opted for 2½ hours but with hindsight should have gone for 3.  I’ve left myself quite a lot of ‘finishing off’ to do – to make sure stems are firm enough for example – before the flowers go into the installation in early June. I could wrap the floppier stems in florists wire but I’d prefer them to be fully felted. It also took me way longer than I’d realised both to develop the prototypes and prep all the materials. Happily I was able to put the time in and I’m now fully ready for any future flower felting opportunities!

The installation is from 2 June and I’m really excited to see how it all comes together and how the flowers fit in. I took part in a couple of the other workshops: making slab pot vases and monoprint doilies. There’s something really joyous for me in taking part in a community art project and the Horsebridge have done a wonderful job in involving lots of people in the installation. As well as a series of workshops, they’ve sent out lots of making kits for people who can’t get to the centre to make things and worked really hard to involve lots of different members of the community. If you’re interested in the end result I’m sure the Horsebridge Arts Centre will post photos so here’s a link to their website. https://thehorsebridge.org.uk/ and a big thanks too to Arts Council England for providing the project funding. https://www.artscouncil.org.uk/.