Browsed by
Tag: silk paper birch trees

Various green sheer fabric from my stash.
Birch Landscapes Completed

Birch Landscapes Completed

Comments 12 comments

When I last posted, I was working on two birch landscapes. I had finished stitching the branches on one and was working out what I wanted to do about leaves.

Blue and green felted background with silk paper birch trees and free motion machine stitched branches.

I stitched the branches on the second landscape with free motion machine stitching.

Two landscapes side by side before leaves are added.

These work very well as a pair. I didn’t do anything to emphasize the “lake” or “water” effect of the background. I thought each person could interpret the landscape as they see it.

 

Now for the leaves. The photo on the left shows the sheer green fabric I had in my stash. It’s a combination of polyester organza and silk organza that has been hand dyed. I ended up using the more yellow green silk organza choices.

Felted blue and green background with silk paper birch trees and cut leaves place on branches.

I cut a bunch of leaf shapes. I don’t use a pattern but just cut them out randomly. I have found that they need to be different shapes to look natural so I just start cutting shapes that are vaguely leaf like. In the photos above, I have laid the leaves on top, again very randomly, to see if I have enough coverage. I ended up adding a few more after I started stitching to fill in where needed.

Felted blue and green landscape backgrounds with silk paper birch trees and cut leaves stitched in place.

Here are the landscapes after stitching down the leaves. Now, I am going to work on stitching them to a background fabric and lacing on to boards, so they are ready for framing. What should I name the pieces? Any ideas?

Blue and green felt background with silk paper birch trees stitched to felt and machine stitched branches with dark grey thread.
New Landscapes

New Landscapes

Comments 21 comments

I started a couple of small landscapes this past week using pieces of nuno felt for the backgrounds but using the wool side instead of the silk side. I thought the “backs” were more reminiscent of forest than the silk side.

I already had some of the “birch” silk paper that I made several years ago so I used it for making trunks. Here’s my inital layouts for the two pieces. They are both about 5″ x 11″.

I then stitched the trunks down with 30 weight cotton machine thread in a very light grey. You might have noticed that I added a few more tree trunks to the right photo as it seemed a bit bare.

Blue and green felt background with silk paper birch trees stitched to felt and machine stitched branches with dark grey thread.

Then off to the machine to stitch the branches with free motion machine stitching. I only got one of the pieces machine stitched as I got tired with machine stitching. I am out of practice, I guess. Now what to do for the leaves? I could hand stitch, or use some type of applique.

It could be like ‘Thick with Green’ where I used cheesecloth for leaves.

Or perhaps more like ‘The First Leaf’ with green leaves instead of yellow. Or I could hand stitch the leaves? What do you think?

Thanks Carlene for providing me inspiration to create more birch trees!

Nuno Felted Landscape with Autumn Birch Trees and leaf litter on the ground.
Calling Down from the Branches

Calling Down from the Branches

Comments 20 comments

This is the final installment of my large nuno felted autumn landscape, it is finally finished and I have even stretched it over stretcher bars so it is ready to go the framer next week. It is my entry for the 4th Quarter Challenge  of the year long tree challenge. I’m way ahead this time. Yay!

In my last post, I was trying to determine how to handle the ground and prevent the background trees from “floating”. I decided to try leaf litter on the ground. I used the same fabric and paper that I used for the leaves on the branches. You can see on the left hand photo the first attempt. I had some leaves that were already cut out but these were much too big. It made the ground move forward since the leaves were the same size as the foreground tree leaves. Not the look I wanted. So I cut the leaves into tiny pieces and scattered them about. I didn’t want to bore you with all of the time I took arranging the leaves. You can see the progression from left to right. I had taken over 10 photos of this progression but thought I would show the first, middle and last photos. Perhaps you can tell a difference that way! Once I had the leaves where I wanted them, I glued them down with an archival gel medium. I don’t usually use glue but these pieces were so small, I thought that was the best option.

Next up was to determine the color of the “matte”. This is the fabric that I stitch the nuno felt down on to hold it in place for framing. I decided to go with the darker grey fabric. Then I stitched along the edges of the nuno felt to hold it to the background fabric. Normally, I would then lace the fabric over matte board or foam core but this piece is big and I decided to use stretcher bars instead. The stretcher bar frame is 23″ x 34″. I wrapped the fabric around the stretcher bars and stapled it in place. The hardest part of that process is getting the nuno felt landscape in the right position since you staple from the back side.

Nuno Felted Landscape with Autumn Birch Trees and leaf litter on the ground.

Here’s the piece on the stretcher bars ready to be framed. I will use my usual slim black frame. Did anyone notice anything else that was changed at the very end? Calling Down from the Branches is now ready to go to the framers and then off to the gallery.

Autumn colored nuno felted background with silk paper birch trees, stitched branches and silk fabric leaves partially stitched in place.
Large Autumn Landscape – Adding Leaves

Large Autumn Landscape – Adding Leaves

Comments 18 comments

I have been continuing to make progress with my large autumn landscape.

Autumn colored nuno felted background with silk paper birch trees, stitched branches and set up with thread, scissors, cut out silk leaves and reference photo.

I began by looking for silk fabric in the correct colors. I found a yellow orange and a yellow green. But I needed a lighter mid yellow. I didn’t have that in silk fabric but I remembered some rice paper that I had painted yellow and coated with matte medium. I could use that for leaves too. To prevent the silk leaves from fraying as much, I ironed a light weight fusible to the back side of the fabric. Then I cut out a variety of leaf shapes. The secret to making leaves look more natural is just cut them out freely by hand. The shapes will be all different and the sizes won’t be exactly the same but that is what you want. I found a photo online to give me an idea on how the leaves should look and used that for inspiration.

Autumn colored nuno felted background with silk paper birch trees, stitched branches and silk fabric leaves partially stitched in place.

When I was stitching the leaves down, I wanted some movement and the feeling of the leaves about to fall. Therefore, I only stitched them down with one or two straight stitches. This allowed the fabric leaf to come out from the background and be more three dimensional.

Autumn colored nuno felted background with silk paper birch trees, stitched branches and stitching more silk fabric leaves.

Cutting and stitching individual leaves takes a bit of time but I liked the result.

Autumn colored nuno felted background with silk paper birch trees, stitched branches and silk fabric leaves.

Here’s the piece after adding leaves. I may add a few more in a couple of places but I am evaluating now to see what else the piece might need. I haven’t cut off the bottom edge but I will be doing that shortly. I could add fallen leaves at the base of the background trees. Or I could add a bit of grass here and there. Or I could leave it alone. What’s your vote?

My idea for a name for this one is “Calling Down from the Branches”.

Nunofelt autumn landscape with silk paper birch trees, one foreground machine cord branch couched in place.
Large Autumn Nunofelt Landscape Continued

Large Autumn Nunofelt Landscape Continued

Comments 13 comments

I have been continuing work on my large autumn landscape. I added the large tree trunk and branches and was planning on adding leaves to complete the piece.

Black machine made cord of yarn and thread on white background.

However, I decided it need darker branches on the larger, foreground tree. I had some black wool yarn that I decided to use for machine cords. I twisted three pieces of black yarn together and then zigzagged over them by machine with a near black thread. Some of the yarn pieces I left apart so that there were narrowing branches of either two or one yarn diameters.

Nunofelt autumn landscape with silk paper birch trees, one foreground machine cord branch couched in place.

Then to start stitching them in place. I didn’t have a specific plan as to where they would go, I was just winging it. I couched the cords in place and in the thicker areas, I used two machined cords couched side by side.

Nunofelt autumn landscape with silk paper birch trees, foreground machine cord branches couched in place.

Here’s the piece after I had couched all the machined cords in place. You might also notice that I have folded the bottom of the piece up to see what it would look like without the bottom four inches or so. I liked the look of it better. It feels like a better scale to me. I haven’t cut it off yet, but I think I will soon.

Nunofelt autumn landscape with silk paper birch trees, foreground machine cord branches couched in place and stem stitch smaller branches added.

Then I decided that I needed thinner branches coming off the thicker foreground branches. So I used the same almost black thread in size 12 (Sulky cotton machine thread) and stem stitched the other branches. Click on the photo to see the branches in more detail.

Next up is leaves for the foreground tree. I will be cutting those out of yellow, yellow orange and yellow green silk. My plan is to add fusible web to the backside of the leaves so that they will not ravel at the edges. Then I will probably add a bit of grassiness at the base of the backgrounds trees and call it good. But you never know, I will evaluate to see if it needs anything else when I get to that point.

 

Silk paper birch trees laid out on netting and plastic after being covered with acrylic medium.
Making Silk Paper and Beginning a New Landscape

Making Silk Paper and Beginning a New Landscape

Comments 16 comments

Having sold one of my larger pieces in the gallery, I had a request for a new large nuno felted landscape similar to The First Leaf. So if you are reading along and think that you are having deja vu, it is because this piece will be very similar, just a larger size. The new piece will be 19″ x 33″ and will use the same nuno background used in The First Leaf which is only 14″ x 18.5″. The first step was to make silk paper for the birch tree trunks. I had a little bit left in my stash but it was not big enough or long enough.

Silk paper birch trees laid out on netting and plastic with layers of white silk fiber and black accents.

Making silk paper is simple. You lay out silk fiber on to nylon netting, cover with another piece of nylon netting, wet down the silk and then paint on some type of acrylic medium. You are supposed to use fabric medium but I didn’t have any so I just used acrylic medium that I had. The photo above shows a portion of the layout of the white silk with black bits added on top. The nylon netting came in a roll so I could make a giant long piece of silk paper for my big birch tree.

Silk paper birch trees laid out on plastic with layers of white silk fiber and black accents and sandwiched between netting.

I made two lengths of silk paper. Here you can see one side laid out sandwiched between the nylon netting. The left side still needs black added. I actually think that the left side is not silk but perhaps viscose or other man made silk alternative. It didn’t feel exactly like silk but it was white and worked just as well as the real silk. I use up what I have before I buy more supplies, so other options of fiber will work for making paper.

Silk paper birch trees laid out on netting and plastic after being covered with acrylic medium.

Next you wet down the silk fiber sandwiched between the netting with soapy water. The soap helps to break the surface tension and allows the silk to accept the water more easily. You can spray it down or sponge it on, whichever works best for you. Once the silk is completely wet and there are no thicker, white spots left (air), then brush on acrylic medium mixed half and half with water. Flip the net and silk sandwich over and add acrylic medium to the other side too. Make sure the silk is thoroughly saturated with medium. Then peel off the top layer of netting and leave the silk paper to dry. You can hang it up to dry but take note that the water/acrylic medium will drip off and get on the floor if you hang it inside. I left mine flat to dry and it took a full day to dry.

Nuno felt background with birch tree silk paper trunks laid out.

I cut out my nuno felt background to size and played around with cutting the silk paper trees to different sizes to achieve some depth in the piece. These are the approximate layout that I came up with. Next on to stitching!