Felting and Fiber Studio

Having run out of already felted nuno backgrounds, I decided to try a large landscape and create it in a mosaic type of nuno process as opposed to one piece of dyed silk. I got out my remaining already dyed silks to see what was available. After looking at what I had, I decided on a sunrise or sunset with the sky being around two thirds of the landscape.

I started with a large piece of white prefelt, fluffed it up with a brush to make sure it would felt more easily. Then I added a very light layer of merino in the colors of the landscape. I used short fiber merino hoping it would help “glue” the small pieces of silk. I then wet down the wool before applying any silk.

I started with the sky and continued to wet down all the silk pieces as they were laid out.

I kept working my way down trying to make sure that there weren’t any completely straight edges on the silk. I did add bits of wool underneath the silk if there was more than one layer of silk. Once the sky was finished, it was on to the mountains and the foreground.

I added silk for the mountains and the foreground. I decided to add some green wool on top for some pine trees and to soften the edges between the foreground and the more distant mountains. Then on to felting.

Here’s the piece after it is partially felted. It did require a lot of careful rubbing but most of the silk stayed in place and adhered to the wool.

Here is the piece after being completely felted. I decided for now to call this piece Montana Sunrise. I am going to add stitching and more detail to the foreground but that’s for another post. The finished size of the piece is approximately 16″ x 30″.