Sampling Sulky Sticky Fabri-Solvy
Recently, I got an order from Sulky for more machine threads and a product that I have wanted to test out for a while.
It’s called Sticky Fabri-Solvy. I have used the Fabri-Solvy for machine lace and liked it. But this one has a sticky surface, so you can press it down on a piece of fabric or felt and it sticks. Or you can stick smaller bits of fabric or felt down to it and then stitch. You can also run it through the printer to print a design on it and then use the printed design for your stitching guidelines. I haven’t tried that yet but I’m planning on testing that out as well to see how that works.
Here is a piece of the Sulky Sticky Fabri-Solvy. It has a backing paper which you pull off to reveal the sticky surface. I did a small square about 6″ x 6″ for my sample. I cut two pieces the same size.
I then cut up some old printed felt in small bits and place it over the surface. The felt sticks down and holds fairly well.
I kept adding felt in a variety of colors filling up the blank spaces. You could certainly leave blank spaces if you wanted the result to be more open and lacey.
Once I had all the felt laid out, I then put the other piece of Sticky Fabri-Solvy on top with the sticky side down. I should have left a bit more room around the edges but it ended up working out OK although the edge pieces tended to bulge out and want to jump off before being stitched.
I then used four of my new thread colors to free motion machine stitch over the sandwich. I didn’t use a hoop and it seemed to work just fine. You have to be careful that the edges don’t get sucked down into your machine though. I used a meandering stitch to give an organic feel. I didn’t want any straight lines.
And here is is with all of the stitching done. You need to catch all of the pieces of felt with your stitching to prevent the pieces from falling apart once you dissolve the water soluble fabric.
Then you just stick the whole thing in some warm water, let it soak for a bit and the Sticky Fabri-Solvy dissolves and disappears. If you don’t wash it all out, you can use it to help hold the shape in different positions. It acts like a stiffener. I washed mine mostly all away so there is no residual stiffness. I plan on trying this technique with some sheer fabric pieces too.
Have you tried a new product lately? We’d love to hear your results. Show us over on the forum.