Someday I hope we will have a local felting convention, full of classes for Wet, Dry or even Damp felting! In the meantime, I have done the best I can and found a cosy corner or even a full table at the board gaming conventions in the city (there are two which have an unexpected felting component, they are very patient with me).
Each year on the long weekend in May CanGames happens in a curling arena in downtown Ottawa (Canada). It starts on Friday afternoon and runs through to Sunday night. There are board games, card games, RPG games, game testing, and I think LARPs in the basement, but I didn’t make it down the stairs. There were also vendors for shopping, and the Kanata Games club had an open gaming area at one end of the arena, across from the secondhand game sale on Saturday morning. Beside the open gaming and just before the last vendor is the felting area (it’s small, but an increasing number of gamers check in to see what is being worked on this year).
While Glenn gathered and priced the games he was going to sell, I assembled fibre, reference photos (I could have used more), my felt pad in a zip-lock bag, a selection of needles, 2 project bags and a couple of bottles of Mountain Dew to keep me going. I already have in my car my small folding aluminium table, and my walker which is just a chair with cool wheels (Glenn says I need to upgrade to Ben-Hur wheel spikes).
We arrived early on Friday before noon and waited for the convention to open. I then settled into my regular spot by the open gaming and the last vendor spot. I have been in the same spot for the previous years. I had 2 project options in my felt box from which to select my weekend project. I decided on the partly wrapped armature of the llama, which was from the Llama Needle Felting Tutorial that I had started to watch on Sara’s YouTube tutorial (https://www.youtube.com/watch?v=UvqR_OPVmbI&t=1739s). I had the armature and the initial layer of core wool wrapping done. Since I don’t have mobile access to the internet, I decided to detour from her instructions at this point…. I have pulled a few photos of llamas and comparison shots with alpacas to help, but I did not have time to do as deep a research dive as I usually would enjoy. I should have really watched it all the way through to the end of the tutorial, and not just the first part with the armature and the under wrapping of core wool. Let’s see how this goes!
I have already derailed from Sara’s instructions by adding a lower jaw so I can open his mouth. I may add a tongue or maybe not? I will have to look at more photos later. For now, I want to focus on the face and bulking up the body. I added bits of core wool. I think I was switching between the T38-333 blocking in fibre and the SP40-222 for more of the firming and surface sculpture. Since I will be adding a fur top layer for his coat, I want a reasonably firm understructure but not as firm as my fish-people. While I start sculpting his face, why don’t you take a peek at the open gaming from the Kanata Games Club? You may spot something fibre-related. I have already been asked if I have one of a few alpaca/lama board games (I have one of each so far, as well as quite a few sheep-inclusive games. We can chat about them if you would like some other time).
Across the arena from me is where the secondhand board game sale will be. There will be more games dropped off up until before the sale starts, which will be Saturday morning at 10 am. 3 years ago I was 3rd in line, 2 years ago I was second in line, I wonder if I will be first in line this year?
Just peeking, there are a lot of interesting boxes of games, some very old ones included too. I will do my best not to buy Glenn any games he is selling this year. (oops) I had better get back to work, or we will not have much felting to talk about today!
Friday afternoon into the evening, working on the understructure. Slowly sculpting the face and then starting to bulk up the hips. I regret not getting the chance to watch all of Sara’s instructions.
I was very focused on felting and chatting about felting. It was later in the evening than I thought when last year’s Chariot Race winner dropped by to see what I was working on. While chatting with her and showing her what I was working on, I eventually remembered to check how the Friday night chariot race was going. There seemed to be a lot of carnage this year! She said she had been attacked by many other chariots and was now out. I went over, and only 4 chariots look like they are still moving.
Glenn returned after playing one of the games upstairs and was ready to head home. We made a quick stop to try and sign me up for a murder mystery RPG game on Sunday (there are 4 players signed up, but if one doesn’t make it, I will get to take their spot)
Saturday morning: We headed in early. I have a new strategy this year for shopping. Instead of working at my table, then joining the line when it starts, I am going to be the line! The Lama and I got comfortable in the walker and watched more games arrive. I forgot to pull out the camera! I got focused on felting and then on shopping (Glenn had a list of things he had seen that I should watch for, and 2 other games he would like, if I see them.) As always, there seemed to be both amusement and enthusiasm in my odd focus of gaming topics. I seem to have all the sheep games, so have decided to branch out, and am now looking for other fibre-bearing creatures (or spin-able or felt-able fibres, can I find games about cotton or flax?)
I found 2 of his 6 games and no fibre-oriented games, but got distracted by a few other games that might be fun at the cottage. You can see a few of them hiding under my jacket behind the llama, now back to felting.
The face is improving; I don’t have the lower lip/chin quite right, and the eyes will look better when I add colour and eyelashes. Oh, and the ears (what you see is actually the wrapped ear wires since I want to be able to adjust the ears and pose them.) I can’t remember if Sara had added the ear wires or if I am off on a tangent again.
What a surprise! Do you remember the lady doing the triangular loom demo in Peterborough a few weeks ago? She just dropped by to see what I was doing. It was nice to see what she had been weaving on her triangular loom.
I kept puttering at my understructure as he slowly started to look a bit more llama-like.
A quick break to see what is happening around the curling rink.
Back to felting, I am still getting too many “Is that an alpaca?” comments. I need to add the ears! Llamas have much taller ears than alpacas. They also have the reputation of being grumpy and spitting, but I am not sure I could express the latter in felt.
Ear shapes, leaving a wispy end unfelted to help attach to the head.
Looking at the few reference photos that I have with me, I keep thinking of their shape, reminding me either of Rabbits or Bananas? (Maybe I am getting hungry.) That’s not quite right, though; now he looks a bit like a weird, long-legged bare koala bear?
I need to create more of a folded ear and make it thinner. I have scissors and felting needles; I can do this!
Now that I have the body to a medium firmness, the ears are close to what I want, and I am impatient to start adding the top coat. I am going to use the shingling method to create the top coat. As I have mentioned before, there are lots of ways to achieve the same effect. I could use a reverse needle to create a fuzzy nap, similar to what you see on the back of a felt picture. Or there are a number of options to lay on the layers of top-coat to create a more realistic coat.
You can create different effects by how you choose to add the fibre. Let’s take a peek at what I did this time to make a fluffy llama ready to be sheared, then we can consider other options I might have tried (probably in the next post, this one looks a bit long already).
I usually start at the lowest part of the body that needs fur and work up. I have seen other felters start from the head or centre back and work down. Both work, but the latter requires you to lift the fibre you have applied to place the next section under it. Both options will work, but the latter feels like more work to me. But if it works for you and you get the effect you want, then stay with the method that works.
Llama was having a hard time playing since I had not finished his eyes yet.
I am working cut end down and tip end up. I am also attaching the fibre quite deeply since this is actually a fine alpaca fibre I am pretending is llama. Deeply felting, it will help it stay secure.
This is the section I am working from
I am not sure if he is questioning my judgment or wants to be a different colour.
Another quick break to see what’s going on at the other part (gaming) of this convention
I had signed up as a replacement if one of the 4 players in a mystery RPG didn’t show up. One was late, but they eventually all arrived. Drat. If it is offered again next year, I will sign up earlier. You got to play one of 4 little old ladies who were in a book club together. Someone dies (there was mention of Lovecraftian circumstances!!) and you have to find out what is going on.
Glenn helped to carry the walker up the stairs, then back down when all the games arrived. It is an old building and has accessibility issues. It is very hard to find a venue that suits and will not bump them for a wedding or other more lucrative booking. All that climbing was not fun, so let’s take a moment and look around before heading back to the Felting Convention Corner.
Glenn’s coughing was increasing, so we decided not to stay around to watch the Kill Doctor Luck (life-size) game, lest we pass on his plague, and head home a bit early. I packed up the box of felting supplies, one almost furred llama, and folded up the little table. Glenn packed it all up in the car with a few more games that had been labelled free and left on a table for redistribution (I picked up a few for the cottage!)
This was again a fun (felting and) gaming convention. You never know, next year we might double the size of the felting component and have 2 needle felters working in the corner! There was definitely more interest in needle felting this year.
I would like to chat more about the technique referred to as shingling to give the illusion of a coat. There are a number of options, such as the direction you lay down the fibre (top to bottom or bottom to top?), the staple length, do you fold it over, if so, how much half and half, 1/3 to 2/3’s or not at all? Which fibre do you select to mimic an appropriate scale replica of what you are making? Long, soft and drapeyer as I was working on, or do you need shorter and stiffer?
I found an eyebrow brush. I did not realise that was a thing to do. I can see it being much more useful to me to gently arrange the fibre I just put on. We can also adjust the top coat with scissors if it’s not just right yet. I love that felters can cut staple lengths if they don’t suit the purpose wanted.
Let’s chat about that more later. Have fun and keep felting!
