Rare Earth Magnet on sale! Just add wool for more fun!!

A couple of weeks ago the latest princess auto flyer booklet arrived. It is always fun to look through and see what is on sale! Princess Auto is an interesting store that has a vast variety of things, hunting, camping, farm supplies, a bit of blacksmithing, welding, tool boxes, electric bikes, and lots of stuff I am not sure what it’s for but it looks interesting. I sat down to see what exciting things might be included this time. There may be more Bee Decapping combs (which make very cheap emergency wool combs! However, I have a couple of sets so maybe I don’t need to get another pair?) Aha! There is a metal bench on sale, circle that! Is there anything else? YES!! Magnets! (This is the link, they will go back on sale again sometime) https://www.princessauto.com/en/48-pc-rare-earth-magnet-and-dispenser-set/product/PA0008996993 ) 1) 48-piece Rare Earth Magnet and Dispenser Set

Glenn had a couple of things circled in the flyer too so stopped in after work the first day of the sale. I wasn’t quite sure what I was going to do with them but I knew it would be fun and I bet there will be wool involved. These are very strong yet very tiny magnets.

 2) Tiny, tiny Enthusiastic Magnets sticking to a felting needle to show you how tiny they are

I had a question a few weeks ago about making a sheep head, if I make a tiny sheep’s head I bet I can make a broach. Where did I put the wool with the tiny crimp I had purchased from Ginger at Farm Sol at the Wakefield Farmers Market? And more important, can I get more?

The mark 1 prototype I used unlabeled white wool roving, I am hoping it’s Corriedale but I’m not sure. It seemed less enthusiastic to felt than I usually find in Corriedale. So after more stabbing than I would have liked, I did get a basic head/nose shape.

3) This may not be the Corriedale you were looking for (spooky Jedi background music)

4) Eventually there was a head-like shape, sort of

Now that isn’t as sheepish as I would like. (This is why reference photos are really helpful) I know what’s missing,  I will need to add ears!!

5) Ears added to the slightly sheepish head

Now that is a bit better. Next to add the first magnet.

6) Magnet balancing precariously on superior aspect of sheep neck

The magnets were tiny and behaved in a slippery manner determined to fling themselves to their death on the floor!! Alas for the magnet, I used another previous Princess Auto Sales item to find them and pick them up!! (Without bending or crawling around on the floor under the computer desk, even better!!)((I am suggesting anyone doing Dry Needle felting should consider this marvellous invention to retrieve errant needles, and magnets from the horror of nether regions that the floor has become.))

7-8) Extending magnetic picker-upper of things mettle, with built-in light (it Is dark under the table)

The version that is brought in for sales with the light doesn’t seem to be on their website but here is the link for the lightless one. You can likely find something similar at any hardware store, this one says it will pick up 3lbs (that would be one big needle!!) https://www.princessauto.com/en/3-lb-magnetic-pickup-tool/product/PA0008716615

I wound up trying 3 ways of affixing the magnet into the back of the sheep head.

9-10) First I tried lightly felting a bit of wool, then attaching it to the back of the head. This was not totally successful since the magnet migrated lower than where I had been trying to hold it. I also found the needle was very attracted to the magnet when I tried to poke adjacent to it. Interesting.

This did let me find out that the magnet is strong and once embedded in the wool stuck to bulldog clips (some people call them binder clips) with enthusiasm and required gentle prying to get them to let go.

11) Sheep head sticking to bulldog clip

Next, I tried a divot in the superior aspect of the neck or back of the skull depending on your perspective. I placed the magnet in the dent and then added a backing that I had felted flat.

12) Magnet sitting in a bit of a divot and leaving the rest of the loose wool to work over the top of the magnet once it was in position.

13) The magnet was attracted again to the needle so this may not be quite the best solution

14) It was a bit more challenging to keep the magnet where I wanted it but the divot did help.

15) Success! But this took more time but kept the magnet location where I had wanted it.

(16) The third option is “this picture is unavailable” which was a combination of making a dent to seat the magnet and then making a felt backing for covering the magnet. I could have used a commercial felt but it’s so easy to just make a bit more of the wool you are using and you are sure it will match the head if you use the same wool.

17) Now let’s talk about ears.

It is time to use those C40-111’s again, Crown Needles!!! For the first two sheep heads, I attached white ears and then added the wisp of pinkishness to the attached ear. For the third prototype, I build a base layer of the white, then lay in wisps of pink to make the inner ear. Using the crown needle at an angle close to parallel allows the addition of colour to one side without affecting the other. The working depth of the crown needles is much shallower than regular needles. Once the ear was constructed I attached it to the head. This was a bit easier than adding the pink to the ear after it was attached.

18) Time to add the second Magnet and check it sticks through cloths. Yep!

This sheep is still rather naked and needs curls. Remember that trip I took to Wakefield a few posts ago? Well, we are about to find out what happened to those fabulous little locks.

19) The tiny crimpy locks from Ferme Sol Farm in Wakefield Quebec http://www.fermesol.ca/

The locks worked perfectly. The tight and tiny crimp was perfect for this scale of sheep. Her sheep are Icelandic/ Frisian/ Gotland/ Finn and Shetland crosses. These were really fabulous fibre blends.

20-21) Front and back view of the sheep broach with a second magnet to go inside your shirt. This is less damaging to fabric than a pin broach back would be.

22) Here is the sheep with both the curls and ear details added.

23) A bit of online shopping arrived and I have added the two new boxes to the tools I used for this project (you don’t need quite this many needles I actually only used 3needles, which were each different, to make the sheep)

I had ordered two more needle boxes, this time a T-38G-333 and T-42G-222.  The T is the shape Triangle, the first number is the gauge, the G is the tip or point specification, and there is another letter designating the barb specifications which I have ignored and the last digits are the number of barbs per side. So I will leave you with a shot of the new needle boxes (yes there are 500 needles in the new ones a bit less in the older boxes) and the other tools and pieces I used for this project.

Next week I have a choice of things to tell you about, Mr. and Mrs. Mer’s trip to the Carp fair (Friday, Saturday and Sunday) or the mini-workshop I gave on a card stock 7- strand kumihimo-like braid (Monday). There is also going to be another trip up to Wakefield this coming Saturday, to purchase more little locks and hopefully get some good pictures.  It has been a VERY busy four days in a row!! Now it is time to find the Robax-platinum and crawl back into bed for a day or so.

Have fun and keep felting (even if you are wearing gloves – you will hear about that when we chat about the Carp fair!)