Ta-Dah! I finally finished my parasol. If you haven’t a clue what I’m talking about, please see this blog post
I made a paper pattern of the segments of the umbrella then I cut out the felt panels.
I stitched the panels together using the wide zigzag stitch that worked so well on my sample. The thread I used (top and bobbin) was ‘The Bottom Line’ by Libby Lehman – it’s almost ‘invisible’ and the colour of the felt showed through the stitches.
I was worried about how I could ‘pin’ the panels together for stitching, but as the felt is thin and firm thanks to the fabric between the fine layers of wool, it was easy to sew by just butting the edges together just before the pieces went under the needle. The parasol shape became obvious after only stitching 2 panels together.
I cut a hole in the centre so that the cover would slide over the central pole. To reinforce the hole, I found an old metal key ring that was the exact size. I glued it in place, then stitched it with perle embroidery thread.
I trimmed the bottom edge, then using the same red thread that formed the flowers, I secured the cut edge with blanket stitch. It’s a very bright red – I’d describe it as neon because it almost glows!
Compare the zigzag stitching in the photos above and below – one looks blue the other looks yellow, but it’s the same pale grey thread described above.
The ends of the spokes of the umbrella have plastic caps with large holes at the back so I secured the cover to the end of each spoke with thread bows.
Ann (Shepherdessann) expressed an interest in what the parasol would look like inside, so here it is on its back (the under layers of wool were plain colours – baby blue and canary yellow.
The summer cover is quick to fix in place and just as quick to remove, and fold away, for the winter.
