I have finally completed my winter birch landscape that I have been slowly working on. You can see the prior posts here if you missed them.  I had about determined to skip adding any extra snow in the foreground but then I decided I should try a sample of needle felting the snow.

And, surprise, surprise, it worked better than I thought it would. So I added a bit of snow and then needed to figure out the distant red twig dogwood bushes. (You can see the snow in the final photo.)

First I tried using a marker on my sample to see if I could get away with something easy. The thinner marker made a very light line and the heavier marker was too heavy. Plus, using a marker on nuno felt gives a very uneven line. On to the next idea.

Next, I tried needling the wool thread into the sample background. It didn’t feel like there was much difference between the stitched bushes in the foreground compared to the needled line on the top left.

I decided I would try a cotton machine thread (30 weight). The stem stitched sample on the left shows two different colors. The redder color is straight off the spool but I wanted the thread to be a bit darker and variegated. So I colored the thread by hand with a black marker. The photo on the right shows the thread before it was darkened (left side) and the thread on the right side of the photo has been darkened with a black permanent marker. It worked perfectly although it’s a little messy on the fingers.

So here’s the finished landscape. I used the machine thread for the distant red twig dogwoods and you can see the small amounts of snow that I added. I’m happy with it but I will put it on the design wall to look at to make sure it’s finished. Then I will need to choose a “matte” fabric and get it ready for framing. I’m thinking of calling the piece “Winter Color”. Or I could stick with “Winter Birch”. Which do you prefer?