Canadian Arcott Ram #2 Part 1

Canadian Arcott Ram #2 Part 1

A quick review of the Acquisition

1-2 scenes from last week

I told you last post that I had re-bagged the two Canadian Arcott Rams. They looked quite well skirted but one seemed more careful with his personal hygiene than the other. I started with Ram #2 who seemed to enjoy his dust baths.

3 Ram #2 4 Ram #15 #2 unwashed sample

Getting on to the Washing

Glenn got one of the washing buckets out and I pulled out the strainer buckets and divided the fleece into 7 portions, 4 quite clean and 3 less clean.

 6-8 test washing of some of the cleanest looking parts of ram #2

This year I tried elevating the washing bucket so it was easier to lift and lower the strainer bucket within it. This was easier until it was time to dump the water out of the bucket. I lifted the strainer buck out and left it hanging to drip on one of the blacksmith hooks. That went well but as I started to tilt the bucket to pour out the dirty water it started to splash on the asphalt driveway. It was determined to get me wet with all the splashing! Luckily, I had thought ahead and worn my rain boots! So my feet remained dry but the lower part of my jeans may now need a wash (but with cleaner water this time)

  9-10

Glenn brought the RV hand washer and spin-dryer up from the laundry room (it just sat there over the winter)

11-12 Glenn Helps with the spin cycle.

After a quick spin, it was onto the drying rack.

13 Now a pause, while the wool dry’s

 14 Glenn takes time to smell the roses.

And now back to work. The test washing of ram 2  is ready to take a look at.

15 now it’s time to eat ice cream with strawberry and think of the different fibre preparations I would like to try with this fleece. let me go find my hand carders and my mini combs! (but after I finish the ice cream)

___________________________________________________________________

Ice cream break!

(its a long post with lots of pictures!)

___________________________________________________

Testing to find out the properties of this fleece

Now that we have the Canadian Arcott (Ram #2) cleaned let’s make a few tests to find out what this fleece wants to become! not all fleeces are good for all purposes, so we should get curious and try a few options. this will tell us more about this breed I have not tried before.

 

Hand Carding the wool Test

Let’s see what happens when we try hand carding. I have a few hand cards, I chose the ones I like the best with the curved backs and have a nice carding cloth. I got them second-hand and have not tried to figure out the teeth count I should probably figure that out eventually.

16-17 rolags from the Hand Cards

Yes, that feels quite soft and lofty but there is definitely some lustre too. This could be interesting as knit socks. If only I Knit!!

Carded spun sample

I used the carders, created rolags and used the Electric Eel Wheel 6.0 (EEW6) to spin the singles.

I plied on the spindle since I didn’t want to switch bobbins for a small sample

18-19 2 ply sample

20  I hung the wool to dry in the window. Even without sunshine, it dried quite quickly.

21 washed 2 ply woollen prep.

 

There is a bit of elasticity in the woollen preparation but not as much stretch as other fleeces I have spun. I think it would make a good blanket or throw if woven and used as warp or weft.

 

 

__________________________________________________________

Hand Combing the wool test

Let’s see what happens when we try the Roger Hawkins Combs.

22loading the comb

23 First Pass

24  Second Pass

25  Third Pass then Drafting off the comb and the comb waste

26

____________________________________________________________

Combed spinning sample

I then took some of the combed fibre and spun it on the Electric Eel Wheel 6.0 (EEW6) as I did with the carded sample.

27 EEW6 with 2 ply sample

It was easy to spin.  I plied on one of my drop spindles since I still didn’t want to change bobbins for the short sample I had created.

28  Washed locks, combed fibre and 2 ply yarn.

29 the unwashed 2 ply samples.

You can see the halo already. I will wash and dry the rest of the sample. I made a mini skein, washed it, swung it around the bathtub, whapped it on the side of the sink then hung it up in the window with a small weight.

30  Hanging in the window to dry. Unfortunately, this seems to have inspired darker skies and rain!

31

33 washed 2py combed top

When dry; the yarn feels coarser than I had anticipated. It is not as soft as a Merino, more like a Corriedale but with less elasticity. There is very little stretch in the yarn so I am now curious as to how it would work as a warp for weaving. This breed may be ideal  for warps.

Comparing the Woolen (carded) vs the semi-worsted (Combed) yarns. The Woolen does have more loft, bloom and halo and slightly greater elasticity. Both would work as weft but I suspect the Combed will be a bit better weft since it has less bloom or halo to interfere in the heddles.

Next, we will check out the felting properties of this sample of Canadian Arcott. We will use the comb waste to check its ability to be needle felted and some of the Carding to check if it will wet felt. Ann is thinking it will not. Let’s see what happens next week!

 

9 thoughts on “Canadian Arcott Ram #2 Part 1

  1. The process of turning fleece into yarn is amazing. How did someone think of this in the first place?
    Did a peasant once look at a sheep and think ‘Yup – he’ll make a nice pair of socks’.

    Your roses are lovely – do they smell as sweet as they look? I have to confess that my eyes lingered longer on your bowl of strawberries than on the fibre alongside it.

    It will be interesting to see if your yarn makes good warp thread.
    As always your note taking is impeccable and will be a valuable resource along with your sharp photos.

  2. What a delightful and informative post! Thank you! Just FYI, Fleece and Harmony in PEI did a brief bit on this breed in their last posting – Episode 73 time stamp 1:05:40 – they use Cdn Arcott exclusively in their mill. You may find it interesting.

    1. I watched that video with anticipation, since I also have a Canadian Arcott fleece and haven’t found much information about them. Unfortunately, the video deals with RIDEAU Arcott. They are both Canadian Breeds, but not the same.

  3. Ooh, sampling! I love to see people sampling wools and reaching interesting conclusions. Now, if I may be so bold: try 3 ply as well? The wool changes a lot when knitted depending on whether it’s a 2- or 3-ply, so I’m very curious 🙂

  4. Bloom, halo, Roger Hawkins combs, swinging, whapping & then weighting….I’m visiting a parallel world or at the very least hearing a foreign language.

    Your testing trials are very thorough as always and will be a useful future guide. With all the work involved you definitely needed the mouth watering strawberries & ice cream and a much needed break to smell those beautiful roses.

    Like Marilyn has said – we will no doubt find out how it felts too.

  5. Hi Jan, I am following and enjoying your journey with this wool. I am hoping you will share with me the brand/name of the portable washer/spinner that you used to spin the wool. It looks very compact amd I would like to investigate further! Thanks!

Leave a Reply to Alberta KarenCancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Discover more from Felting and Fiber Studio

Subscribe now to keep reading and get access to the full archive.

Continue reading