I originally created this still life of a vase of flowers in 2016 for a quarterly challenge. The plan was to create dimensional flowers in a still life but I didn’t pay enough attention to the overall design/composition and the vase didn’t turn out very well.

Here’s the original. The vase was dead center and the surrounding negative space feels the same and uninteresting. The black vase is too stark. I did go ahead and frame the piece and try to sell it but no luck. The piece was really big at 24″ x 30″ so I had plenty of room to cut it down and recreate the piece.

What I did first was to create a different vase. I used some upholstery fabric that I had on hand and cut out a new shape that filled more of the space on the bottom. I then cropped it down with some paper croppers so that I could find the best composition. I had a canvas that I could use so I knew the size that I needed. The new canvas is 16″ x 20″.

I then decided that the vase would look better with some dimension added. So I stuffed it and hand stitched it to the surface. I had to be careful not too over stuff the bottom or left side since they would be stretched around the canvas.

I needed some shadowing on the bottom and left side of the vase. I originally thought I would use black tulle to create the shadows but it was way too dark and had too much contrast. I didn’t have any gray tulle so I decided to use a combination of purple and yellow tulle to give a lighter shadow which tended toward purple. I used matte medium to glue down the tulle to the vase. My original plan was to fuse it down to the vase but when I attempted to iron the upholstery fabric I found that it was some type of polyester and it melted. Oops. I cut out a second vase and used matte medium.

After I stretched the piece around the canvas and stapled it in place. I trimmed off the excess felt. I then decided the piece had “holes” that needed filling. I forgot to take a photo before I started adding other elements. I needed some darker values and luckily had some really dark maroon/purple felt that I was able to fashion into flowers. I hand stitched the flowers together and ended up adding a few more flower buds as well that aren’t shown in these photos. Then I wanted to add some more leaves. I tried some yellow green felt leaves (left photo) but I thought that it needed something darker. I didn’t have any darker green felt so I decided to use some green tulle. The torn tulle gave a different texture too. In the right photo, I was trying the tulle out and just pinned it in place in bunches. I felt the bunches were too over the top so I ended up tearing the tulle into “leaves” and then stitching them down in layers. I also added a few lighter green pieces of tulle under the dark tulle to give a bit more contrast.

I am much happier with the final result compared to the original. The negative spaces (background) are different sizes and give more interest. The center of interest is not right in the dead center of the piece. So the overall composition has definitely been improved.

And the piece has lots of fun texture and dimension. I plan on putting this piece into an exhibition in October. Hopefully, with these changes, it will find a new home. I think that I will just add a backing but not frame it. I like being able to see the colors go around the canvas and the flowers/greenery that reaches off the edge of the piece.

Have you recreated a piece that you weren’t happy with? We would love to hear your story about it over on the forum.