Every year we have a card exchange on the Felting and Fiber Studio forum. Whoever wants to participate signs up, we choose partners and those partners exchange a hand made card. This year I had two partners as we had an odd number of people, so I made two cards. I like to do more of a winter card rather than a specific holiday card. So this year’s card was all about snow and snowflakes.

I started with a piece of felt that I had stamped with the spiral stamp shown above and then drawn on with thickened dye. I attempted to over dye the felt but it wouldn’t take any more dye. The photo on the left shows the back side of this piece of felt. (I forgot to take a photo before I fused the sheer fabric on the front.) I decided that I would stitch snowflakes over the stamped spirals with the lines in between stitched to look like frost or jagged ice. But the color wasn’t too good so I looked in my stash and found some sheer fabric in blues and purples that already had fusible on the back.

So I fused the sheer fabric down. I have started the free motion machine stitching in the photo above. I found the easiest way to stitch the snowflakes  was to get the 6 or 12 radiating lines down first and then add the rest of the structure. You can see that the one on the left that didn’t have the radiating lines turned out really wonky. But this didn’t really matter as it will be covered in the next step. This piece of felt is big enough for two cards so it will be cut down to size in a later step.

Here’s the piece after I stitched all the snowflakes. I was a little sad to cover these up. They do show through but not really giving you the full scope of the stitching.

Then I found some more small bits of sheer fabric that I added over the stitching to give more color.

This is hard to see but there is a very sheer, shiny “fabric” that I stamped with acrylic paint. I am not sure what this fabric is, it looks a little like Lutradur but is more shiny and more open “weave” than the other Lutradur I have. I can’t remember where I got it. That is why I need to use stuff up. It’s bad when you have no idea what the stuff is, where you got it or what it’s original use was. So use stuff up!

I then fused the top layer over the variety of colored sheers and then cut the cards down to size. I machine stitched around the printed snowflake for the top layer and then zig zag stitched around the edges of the card.

I only had brown card blanks and I didn’t like the look of the snowflakes against the brown background. So I used two of my numerous colored papers that worked with the colors in the pieces. I glued the fabric card down to the paper and then fused the paper to the card blanks. I mailed these two cards off to Ann and Diane. Hopefully, they will like them. Unfortunately, there is a postal strike in Canada and it may be a while before the cards arrive.

Do you make your own cards? We’d love to hear about it over on the forum if you do!