I was running out of dyed silk hankies so it was time to brake out the dyeing supplies. before I started anything I had to soak the silk Hankies. They do not like to get wet the way silk fabric does. They really resist. I soaked them for 24 hours in some water with a little soap.

I used MX dye and a low water technique. I smooshed the silk in the bottom of some small containers form the dollar store.

Then I mixed up some dye in little measuring cups using only a small amount of water. Just enough so the silk will be covered after I add two colours.

I added the dye and let it sit for about an hour at room temperature. I mixed up some PHup ( the stuff you use for pools, sodium carbonate) 1 spoon full for each cup of water used in the dye and the water you are mixing it in. I poured some into each container and let it sit a while longer, about 15 min.

I then rinsed them in room temp water and then some soapy water then clear water. One was to much all one colour so I did a spot dye.

And here they are drying on the table.

I will use them  for surface design on hats and pots and to make flower designs on surfaces by folding and twisting them. you can layer them or stretch them out thin. You can spin with them too if you like.

If you want full instructions on low water mx dyeing I learned about it here http://www.pburch.net/dyeing/lowwaterimmersion.shtml